Skin & Bones Inc. - Hot Rods, Classics & Custom Fabrication

Skin & Bones Inc. - Hot Rods, Classics & Custom Fabrication Salisbury, NC
We offer a wide variety of services from our specialization in custom fabrication, Full restorations, classic car service.

We offer hot rod/classic car appraisal and consignment!

1967 C10 getting the final metal fitment dialed in for another shop 🔥We got all the gaps matching, split the hood on bot...
08/19/2026

1967 C10 getting the final metal fitment dialed in for another shop 🔥

We got all the gaps matching, split the hood on both sides, split the fenders, and built a new door bottom. Just getting the metal right before it moves on to the next stage. 👊


Rolling at last. 🔥This 1963 Lincoln Continental is well on its way to becoming a full custom build. The front and rear ...
07/30/2026

Rolling at last. 🔥

This 1963 Lincoln Continental is well on its way to becoming a full custom build. The front and rear clips are in, the frame rails have been recessed into the rockers, and after a ton of fabrication, it's finally sitting on its own as a rolling chassis.

A lot more to come on this one—stay tuned.

Off to paint! 🎨This '66 Mustang has come a long way. New doors, quarter panels, tail panel, and a whole lot of metal wor...
07/21/2026

Off to paint! 🎨

This '66 Mustang has come a long way. New doors, quarter panels, tail panel, and a whole lot of metal work. Excited to see it in fresh paint.

FordMustang SkinAndBonesAutoRestoration

1974 Ford Econoline back on the road. ✌️We went through the wiring, fixed the broken suspension, and installed a new car...
06/16/2026

1974 Ford Econoline back on the road. ✌️
We went through the wiring, fixed the broken suspension, and installed a new carburetor to get this '70s van cruising like it should. Nothing beats the look and feel of a classic Econoline rolling down the road again.
Keep on truckin'. 🚐☮️.

The K5 Blazer is back from paint in its original two-tone black and white, with the removable top coated in Raptor Liner...
06/10/2026

The K5 Blazer is back from paint in its original two-tone black and white, with the removable top coated in Raptor Liner. Wiring is underway, the interior is coming together, and the LS engine is getting wired up as well. Lots of progress happening and plenty more to come. Stay tuned! 🔥

1926 Ford T-Bucket in the shop 🔥Got this classic back sorted out with brake repairs, alignment corrections, a new intake...
05/20/2026

1926 Ford T-Bucket in the shop 🔥
Got this classic back sorted out with brake repairs, alignment corrections, a new intake install, and cleaned up some wiring issues. Small fixes make a big difference when it comes to drivability and reliability.

05/08/2026

1971 Chevrolet Chevelle in the shop for some major upgrades. 🔧
We rewired the car, installed a Holley Sniper EFI system, added a Dakota Digital dash, mounted new tires, and fixed a flywheel issue.
Now this Chevelle is far more reliable, cleaner under the hood, and ready to hit the road again

Cool patina 1965 C10 in the shopRunning a built 400 cubic inch small block ChevyAdding a lockup controller to make it cr...
04/24/2026

Cool patina 1965 C10 in the shop
Running a built 400 cubic inch small block Chevy
Adding a lockup controller to make it cruise right.

Forgot to post this one — our ‘85 K5 Blazer project headed off to paint a few months ago.Should be back very soon… and w...
04/21/2026

Forgot to post this one — our ‘85 K5 Blazer project headed off to paint a few months ago.

Should be back very soon… and we’re ready for it 👀

Also knocked out a custom tailgate opening cover to clean things up and make it one of a kind 🔧
#

1950 Chevrolet Coupe in the shop — and this one’s a little different 👀Running a Ford engine in a Chevy… you don’t see th...
04/09/2026

1950 Chevrolet Coupe in the shop — and this one’s a little different 👀
Running a Ford engine in a Chevy… you don’t see that every day. Usually it’s the other way around!
Got it in for leak fixes and shifter linkage adjustment — getting everything dialed in so it drives as good as it looks 🔧

Address

Salisbury, NC
28146

Opening Hours

Monday 7am - 5pm
Tuesday 7am - 5pm
Wednesday 7am - 5pm
Thursday 7am - 5pm
Friday 7am - 5pm
Saturday 7am - 12pm

Telephone

+17046640679

Website

Alerts

Be the first to know and let us send you an email when Skin & Bones Inc. - Hot Rods, Classics & Custom Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Skin & Bones Inc. - Hot Rods, Classics & Custom Fabrication:

Shortcuts

Share

Category