Florida Auto Surgeons

Florida Auto Surgeons automotive repair and performance

Operating as usual

We are happy to announce we will be taking on new jobs again. And are once again here to meet your automotive needs! Cal...
11/17/2021

We are happy to announce we will be taking on new jobs again. And are once again here to meet your automotive needs!

Call or message us today!

We are happy to announce we will be taking on new jobs again. And are once again here to meet your automotive needs!

Call or message us today!

We will not be accepting any new jobs until further notice. We are moving shop and looking for alternative areas to cond...
08/30/2021

We will not be accepting any new jobs until further notice.
We are moving shop and looking for alternative areas to conduct business.

Thank you for your understanding.

We will not be accepting any new jobs until further notice.
We are moving shop and looking for alternative areas to conduct business.

Thank you for your understanding.

2020 gt mustang in for fore fuel system, vortech blower, crank sprocket oil pump gears and catted stainless works exhaus...
08/08/2021

2020 gt mustang in for fore fuel system, vortech blower, crank sprocket oil pump gears and catted stainless works exhaust system.

Gt350 in for eibach springs Gt500 in for throttle body and datalog
07/29/2021

Gt350 in for eibach springs
Gt500 in for throttle body and datalog

Coyote swap s197s looking good in the parking lot.
07/23/2021

Coyote swap s197s looking good in the parking lot.

Coyote swap s197s looking good in the parking lot.

This coyote swap had a broken timing chain. We took it in and got him a low milage motor with the addition of a boss man...
07/23/2021

This coyote swap had a broken timing chain. We took it in and got him a low milage motor with the addition of a boss manifold and a jlt intake added on.

Bmr k member, upr coilovers, bmr a arms, bmr rear uppers and lowers, h and r springs, upr billet caster camber plates, o...
07/21/2021

Bmr k member, upr coilovers, bmr a arms, bmr rear uppers and lowers, h and r springs, upr billet caster camber plates, oil filter housing gasket install on this nice 2003 mustang GT centennial edition

3v to coyote swap about ready to go in and get kicking.
07/20/2021

3v to coyote swap about ready to go in and get kicking.

3v to coyote swap about ready to go in and get kicking.

Odin powered Shelby GT350 in for oil balance lines and id1050x injector upgrade.
07/20/2021

Odin powered Shelby GT350 in for oil balance lines and id1050x injector upgrade.

Photos from Florida Auto Surgeons's post
07/18/2021

Photos from Florida Auto Surgeons's post

Full synthetic brake bleed, Front pads and rotors along with the mt82 cocktail mix trans fluid on a vortech gen 2 2011 c...
07/18/2021

Full synthetic brake bleed, Front pads and rotors along with the mt82 cocktail mix trans fluid on a vortech gen 2 2011 coyote

Done ✔
07/18/2021

Done ✔

Done ✔

Coming along very nicely
07/14/2021

Coming along very nicely

We love seeing our builds out and about especially at the center of a large car show
07/14/2021

We love seeing our builds out and about especially at the center of a large car show

We love seeing our builds out and about especially at the center of a large car show

Timing belt water pump on a 07 Toyota Solara
07/14/2021

Timing belt water pump on a 07 Toyota Solara

Timing belt water pump on a 07 Toyota Solara

Starting the finale assembly of the forged mach 1 engine
07/14/2021

Starting the finale assembly of the forged mach 1 engine

Lsg35 tube front complete ✔ Perfect fitment Closed in a prior fab guys attempt to mount a turbo in the frame rail.
07/09/2021

Lsg35 tube front complete ✔
Perfect fitment
Closed in a prior fab guys attempt to mount a turbo in the frame rail.

Got a good amount of fab work done on the lsg35 close to finishing this project.  Tube front and headlight mounts finish...
06/25/2021

Got a good amount of fab work done on the lsg35 close to finishing this project. Tube front and headlight mounts finished. Downpipe and dump tube finished. Intercooler piping finished.

Remove everything and smooth and paint next

Exhaust manifold gasket replacement on a 2003 expedition 4.6.
06/24/2021

Exhaust manifold gasket replacement on a 2003 expedition 4.6.

Exhaust manifold gasket replacement on a 2003 expedition 4.6.

K member install on a 95 mustang getting a built sbf and a 6r80 conversion along with a built rear end
06/24/2021

K member install on a 95 mustang getting a built sbf and a 6r80 conversion along with a built rear end

K member install on a 95 mustang getting a built sbf and a 6r80 conversion along with a built rear end

06/24/2021
2v

Got some slp loud mouths on this 2v
Bbk lt with h pipe and custom catback built in house. 3.5in ss rolled tips

6.2l pulled out of a yukon Denali dropped a valve.
06/03/2021

6.2l pulled out of a yukon Denali dropped a valve.

Turbo piping mock up before getting tigged
06/02/2021

Turbo piping mock up before getting tigged

Koni struts/ shocks. Whiteline sway bars, whiteline lower control arm relocation brackets, white like upper and lower co...
05/28/2021

Koni struts/ shocks. Whiteline sway bars, whiteline lower control arm relocation brackets, white like upper and lower control arms with mounts, steeda control arms up front with ball joints and maximum motorsports caster camber plates.

Koni struts/ shocks. Whiteline sway bars, whiteline lower control arm relocation brackets, white like upper and lower control arms with mounts, steeda control arms up front with ball joints and maximum motorsports caster camber plates.

Dodge ram 2014 in for failed lifter
05/26/2021

Dodge ram 2014 in for failed lifter

More progress on the lsG35
05/26/2021

More progress on the lsG35

Constructing a tubular core support, crash bar, and headlight mounts on the lsg project
05/25/2021

Constructing a tubular core support, crash bar, and headlight mounts on the lsg project

8.8 373 gear install for a miata over at v8r performance
05/21/2021

8.8 373 gear install for a miata over at v8r performance

8.8 373 gear install for a miata over at v8r performance

Camaro in for msd intake, Kooks exhaust system with cats and a flex fuel sensor hooked in.
05/14/2021

Camaro in for msd intake, Kooks exhaust system with cats and a flex fuel sensor hooked in.

Zo6 engine in and all hooked up. Just waiting on a intake to complete this 7 liter power house
05/14/2021

Zo6 engine in and all hooked up. Just waiting on a intake to complete this 7 liter power house

2005 mustang gt in for hotrod cams, valve covers, frpp intake, and timing system
05/07/2021

2005 mustang gt in for hotrod cams, valve covers, frpp intake, and timing system

05/07/2021
3v

2005 3v in for hotrod cams valve covers timing chains and frpp intake manifold

Msd box replacement on this supercharged foxbody
05/07/2021

Msd box replacement on this supercharged foxbody

Address

1640 North Stone Street
DeLand, FL
32129

Alerts

Be the first to know and let us send you an email when Florida Auto Surgeons posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Videos

Nearby autos & automotive services


Other Automotives in DeLand

Show All

Comments

Saw your shop on Mustang lifestyle YouTube Page. Besides the cost of the motor and control pack, what’s the cost for coyote swapping a 2003 new edge GT? 4.6 2v has a broken piston ring so I’ll be pulling the motor myself. Has the stock TR3650 transmission in it. Thanks!