Triple Shot Tuning, LLC

05/19/2026

🔥 WHO’S READY?! 🔥

Join us May 30th from 12–5PM at Boot Stompin BBQ for an awesome event with Muletown Motorcycles benefiting Autism Tennessee! 🏍️💙

🎟️ Enter for your chance to win a custom 2008 Harley Street Glide
📍1112 Woodland Street, Columbia TN
💵 Tickets are $25 or 5 for $100

Come enjoy great BBQ, motorcycles, and support an amazing cause all in one place 🙌

05/11/2026

Everybody mark your calendars. Support veterans and their families and have a great time!! Use the link to pre-register and guarantee your t-shirt size!!

05/07/2026

01/09/2026

Base map is in and everthing in PV4 land is talking to the C3 software. Time to dial in this 2021 road glide limited with a 22xe cam, 55 mm manifold, cobra 2-1-2 header and slip ons. Tuned really good.. little dip on the bottom which could be corrected with a different exhaust, but overall a really nice riding bike that tuned in well from bottom to top end.

01/07/2026

Busy start to the new year here at TST. First up is this
2021 Road glide limited. Wood 22xe cam, 55mm manifold and cobra 2-1-2 header into Vance and Hines mufflers.
Tuning with PV-4. After that, the 2012
CVO Road Glide with a nice Tman 117 using PV OG and then the '14 street glide with mods in progress... also tuning with the OG power vision.

12/03/2025

09/24/2025

Back from vacation and doing the work…. Tuned this softail for with tuner and TRo2. Solid budget setup using 30-30 cam, factory injector, factory throttle body and manifold, stock tappets, cam plate and oil pump, Bobcat 2-1 pipe. Lightweight m8s with a cam are badass. This is a runner.

08/27/2025

Put the “shine” on the tune for this ‘24 Stage 2 Road Glide. VOLUME UP!! 2 step launch test pass with quick shifter active using ECM. Before and after tuning dyno sheet. More info to follow!

08/27/2025

Tuned another one for assembled by This is a PROVEN stage 2 combination that just makes such an impressive improvement over stock in every form of riding….Factory 114 M8, 30-30 cam, plate, pump, tappets and cuffs, SE pushrods, 64mm throttle body and manifold, extreme ventilator A/C, factory injectors. Fullsac 2-1-2 into slip ons with louvered baffle and race end caps. Dyno sheet is with air cleaner on, knock sensors active,

08/26/2025

triple_shot_tuning Tuned this 128
Setup for .
Let's just say they know the parts.
Perfectly assembled using pistons, cylinders, plate, pump, cuffs and pushrods. tappets. flywheel with Carillo rods. Custom ported +1mm valve heads and ported 64mm tb. F47 cam. AR 2-1 header.
Factory CVO heavy ass rear wheel, new chain, air cleaner on, knock sensors active. Ready to tear up the street. The end cap on that pipe lets you know..