Vamos Design & Fabrication

07/31/2023

Share this far and wide. Pete was very receptive and supportive of the request to offer a proper bolt together converter for the platform. Pete being a big fan of the W4A33 is probably the only reason this was possible. Don’t let it die off, it’s now or never. See Pete Nichols page for full information.

06/16/2023

Would anyone who has ordered a catch pan like me to toss a tshirt in the box? They’re only $15 on the website. The first chunk of pans are going out Saturday morning. Thanks for the support 🤟

Use coupon code VDF2023 at checkout to remove the shipping charge

VDF T-Shirt Printed on black Gildan Dry Blend 50/50 shirts Huge thanks to everyone for you’re continued support. **Limited supply**

06/07/2023

Catch pan update:

I’m about wrapped up with all the catch pans that are spoken for, and will be sending invoices out for the remaining balance and shipping charges shortly. I expect to start shipping these next week.

That being said, those who wish to pick them up are welcome to at this time. Send me a message if you’d like to make arrangements. Location is Cincinnati 45245.

Also, if you didn’t make a note when placing the deposit order about also wanting a lower bumper cover tap plate, shoot me a message so I can add it to the invoice. These are available for both 1G and 2G.

03/24/2023

https://www.vamosdesigns.com/product-page/dsm-modular-catch-pan-deposit

Catch pan deposit, non-refundable. Please select the correct generation.

03/24/2023

I should have added this to the previous post. Please let me know if you’d like a bumper nut plate with your pan. It’s extremely difficult to mount the pan without this or the OEM part, highly do not recommend.

Need to gauge how many to make. I chose stainless steel on these, will last 7 thousand years.

Details:
304 Stainless Steel
M6 x 1 inserts

$75 with catch pan purchase

03/24/2023

Here we go. The new modular 1G & 2G catch pans are ready for pre-order.

Price is $500 plus shipping.

**Edit** Add $75 for stainless steel M6 nut plate for bumper cover. This is really a must have if you don’t have the OEM one. 1G and 2G available.

**Plan to set aside $70-$100 for shipping depending on area. These ship from Cincinnati Ohio.

Here’s how this will work. Due to the amount of interest, therefore material cost; I will be requesting a $100 non-refundable deposit be made by Monday 3/27.

If you’re still on board, please reply to this post with a simple 1G or 2G comment.

I will then post a link to the website where you can make the deposit.

https://www.vamosdesigns.com/product-page/dsm-modular-catch-pan-deposit

Thanks everyone for the support, and for your patience.

01/29/2023

While developing the NEW 1G pan, I found it made sense to create a modular DSM catch pan, that’ll work with both 1G and 2G. The front portion will be removable, adapting the pan to your generation.

I appreciate everyone’s patience. I’m making good progress on these, but keep in mind the development work happens alongside current orders.

01/29/2023

1G catch pan coming soon…

01/12/2023

I’ve received multiple requests for these bumper supports. They were designed/tested but never officially released. I will have pricing once laser cut material is quoted. These will be cut when the 1G pans are processed.

Some things to keep in mind:

Factory hood latch not compatible.

The lower support will not fit every application. There may be some work on your end to fit your particular FMIC setup.

The top plate will also be included, not shown.

01/12/2023

2G guys only. I have a few guys wanting a catch pan. I need a better idea how many to cut. Lmk here if seriously interested. Thanks guys.

01/09/2023

How many would like to see a nice 1G catch pan? I think you guys deserve a nice piece.

2g shown, but you can expect the same quality.

Current list:

1G

1. Andy McLeod
2.
3. Gary Lytle
4. Mau
5. Santiago
6. Levi Billingsley
7. Joe Hengel
8. Miles Henry
9. Joe Lozoya
10. Brent Wilkerson
11. Cullen Shanahan
12. Steve Groft
13. Andrew Chavez
14. Adrian Glogowski
15. Jeff Cole
16. Josh Felts
17. Henry Adler

18.
19. monster

2G

1. Garcia
2.
3. Greg Labranche Jr
4. Justin Gundersen Denny

12/08/2022

Any guesses on 60ft and 660et?

Already working on improvements for next year.

10/27/2022

For those waiting, fuel tanks are available to order.

Also, for a limited time…use coupon code VDFBMFSHIRT with any fuel tank purchase to get a tshirt for just $10.

https://www.vamosdesigns.com/product-page/2G-DSM-fuel-tank

10/18/2022

For sale: Xona 7869s X4C T3 82ar
Also have a 9569s possibly for sale

09/21/2022

Headed south to I-64 Saturday, and brought home the small tire win.

07/26/2022

W4A33 Pressure Regulator Shims

I have some extra shims available to those interested. 1mm and 3mm thicknesses.

4mm is good for another ~30psi on top of the Translab spring. Results may vary.

03/29/2022

Makin’ power we couldn’t use at last years OG Kentucky cash days.

02/12/2022

Who else is getting excited for the 2022 race season?

12/17/2021

I have an extra coolant overflow in stock, typically made to order.

https://www.vamosdesigns.com/product-page/coolant-overflow-tank

12/16/2021

I have two W4A33 mounts in stock, just in time for build/maintenance season. These are probably the last two I’ll make. May even throw a T-shirt in if the order is placed by Sunday at midnight…

https://www.vamosdesigns.com/product-page/w4a33-stand-adapter

07/20/2021

Congrats to Mr. Hardtire for another PYOP win. Thanks for your support Christian Lucido!

Christian Lucido

The Hard Tire champ !
Took Home the cash 💰 once again!
And he got the $200 Bounty because Nobody could take him out .

Congrats keep Going But I’m calling on every Hard time I can find next month 🧐😎

06/01/2021

🇺🇸 🇺🇸 VDF T-Shirts 🇺🇸 🇺🇸

Printed on black Gildan DryBlend 50/50

Shirts are available to order on the website and will ship once I receive them.

Thanks for your continued support

https://www.vamosdesigns.com/product-page/vdf-t-shirt

-Bryan

03/30/2021

Looks like MR HARDTIRE is about ready to stir things up!