Wally's Garage

Wally's Garage Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Wally's Garage, Browns Summit, NC.

At Wally's Garage we service, repair and maintain all makes and models of riding/zero turn mowers, walk behind mowers, generators, pressure washers, leaf blowers and chain saws.

Currently repairing an Exmark 30” commercial walk behind mower. The primary blade drive belt idler pulley decided it was...
08/07/2026

Currently repairing an Exmark 30” commercial walk behind mower. The primary blade drive belt idler pulley decided it was time to leave the conversation. The bearings seized and took the belt with it. Going back together now and we’ll have it ready for our commercial customer early next week.

Spring has definitely sprung and your grass is probably showing it. If you need to get your riding or zero turn mower re...
04/17/2026

Spring has definitely sprung and your grass is probably showing it. If you need to get your riding or zero turn mower ready for the season contact us to get your annual service scheduled. Our turn around times are currently running a week. We service all makes and models. Call or text us at: 336-814-5746

If you own a portable generator to provide power to your home during a power outage we highly recommend you start and ru...
04/08/2026

If you own a portable generator to provide power to your home during a power outage we highly recommend you start and run it at least once every three months if not monthly. Do not wait until you and your family need it to find out it doesn’t work. If you do have a generator that you are experiencing issues with we are here to help. If you are in the Greensboro, North Carolina area please contact us to discuss how we can help.

It was a Cub Cadet kind of day at Wally’s Garage. Servicing one and getting the second one ready to put on Marketplace f...
05/25/2025

It was a Cub Cadet kind of day at Wally’s Garage. Servicing one and getting the second one ready to put on Marketplace for sale.
Ran into a little bit of a challenge with the threads on one of the front tires. The threads that the grease fitting threads into pulled out. Without a shallow tap we improvised and welded a 1/4” nut in place to thread the fitting into.

While servicing a riding mower for a customer, upon inspecting the blades we discovered a little excessive wear. Needles...
05/07/2025

While servicing a riding mower for a customer, upon inspecting the blades we discovered a little excessive wear. Needless to say, as part of the service we replaced the blades with a heavy duty pair of mulching blades from Rotary Corporation.

It was a John Deere Green Day at Wally’s Garage! We are in our busy season and here to take care of your equipment. Plea...
04/20/2025

It was a John Deere Green Day at Wally’s Garage! We are in our busy season and here to take care of your equipment. Please contact us to schedule your annual service.

To maintain your mower battery, or any other battery, we recommend installing a Battery Tender battery charger/maintaine...
12/31/2024

To maintain your mower battery, or any other battery, we recommend installing a Battery Tender battery charger/maintainer. These units are simple to use. Simply plug it in and it will do the rest. We are an authorized dealer and we will gladly install one for you.

Back from the dead and ready for a new home. Craftsman YT4000 riding mower with a 42 inch deck. Professionally serviced ...
09/23/2024

Back from the dead and ready for a new home.

Craftsman YT4000 riding mower with a 42 inch deck. Professionally serviced - engine oil/oil filter, fuel filter, air filter and spark plugs changed, new blades, deck leveled, new battery and a new seat.

Only 82.8 hours on the hour meter!

Will be up on Market Place for sale soon for $800 or best offer with free delivery in the Greensboro, NC area.

Oopsie…customer contacted us and indicated they had a problem with one of their deck spindles after accidentally hitting...
08/03/2024

Oopsie…customer contacted us and indicated they had a problem with one of their deck spindles after accidentally hitting some rocks with the blades engaged.

Spinning mower blades and rocks don’t mix!

We installed a new spindle and blade onsite minimizing the customers down time.

In the shop working my second job this evening with Boston providing the tunes! Gotta keep on keeping on!
07/23/2024

In the shop working my second job this evening with Boston providing the tunes!

Gotta keep on keeping on!

Address

Browns Summit, NC

Website

Alerts

Be the first to know and let us send you an email when Wally's Garage posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Wally's Garage:

Shortcuts

Share