AIM / AI Machining

07/08/2026

Look at these cute little Carrillo rods getting matched up with some wossener pistons.

07/02/2026

I am in far lane red lit by .007 was a decent pass though.

06/28/2026

Not the weekend we were hoping for. Weather didn’t cooperate, bike didn’t cooperate. We got one test pass, one qualifier and got taken out first round of elimination. First test pass intake plenum blew off at 5.8 sec and costed to a 6.79@185 was on a good run. Q1 bike lost crank trigger for a split sec and shut off then came right back on running a 6.9 putting us at #13 qualifier. First round of eliminations red lit and didn’t have enough to win. We did run a pb 60 and 330ft and wasn’t far off from pb in 1/4. If we would have had some more passes I think we would have been quite a bit faster.

Thanks to our sponsored for helping make this possible.
BOCO Contracting.
RK Chains
Vortex Sprockets
RCC Turbos
USA Home Health Care
BWR Motorsports

06/12/2026

We have a set of busa cases here that were sent in for bigger studs. They were shipped from a seller to me. We can not find the info on the owner of these. Please message me if you had a set of cases shipped here.

06/09/2026

Check out our line of ZX14 parts. For purchases, pricing and info check out our website. www.aichoppers.com

06/08/2026

Robert Murphy Jeremy Murphy both made it to the finals on bikes we built. Congratulations.

05/29/2026

Our shirts and hoodies are available for purchase on our website and also available at

Shop limited-edition tees, hoodies, and gear from your favorite creators and brands. Drops you can't get anywhere else.

05/18/2026

What a great weekend of racing. We figured out a lot this weekend. Definitely have a fast bike. Little tweaks hear and there on the tune up each pass. Was trying for a 6.5s and 230mph came up a little short but picked up a tenth from last year. Made it to the semi finals. Definitely didn’t think any of this would happen after the last test weekend that we had. Thanks to our sponsors for the help making this happen.

BWR Motorsports Brett Ware
USA Home Health Care Chris Christian
RCC Turbos Richard Peppler
BOCO Contracting Josh Coggins
RK Chains
Vortex Sprockets

05/11/2026

We are pleased to announce that our new ZX14 ignition covers are available on our website. These covers feature a timing mark, allowing for easy timing adjustments without removing the entire cover. This innovative design makes them an excellent addition to any performance engine. Be sure to explore our other new ZX14 parts as well. Check out our crank case vents also. To stay informed about our expanding product line, we invite you to like and follow our page.

Link to our ignition cover.
https://www.aichoppers.com/product-page/zx14-ignition-cover-with-timing-hole