Sanita Performance

Sanita Performance Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Sanita Performance, Automotive Service, 1234 Long Pond Rd, Blakeslee, PA.

Fixing up this zl1 that came into the shop. Had a failure in the oil pump, which is common issue on these cars that Chev...
04/28/2024

Fixing up this zl1 that came into the shop. Had a failure in the oil pump, which is common issue on these cars that Chevy never recalled. Highlighted in red you can see the cracks. She’ll be back up and running shortly 💪🏼

Did spark plugs on our GTR. When running race plugs in high horsepower applications, the life of the plugs arent very l...
08/07/2021

Did spark plugs on our GTR. When running race plugs in high horsepower applications, the life of the plugs arent very long and should be keep up with yearly. Luckily to swap plugs takes less then an hour with some basic tools.

Yesterday we took care of the GT-R that had a bad oil pressure sensor. Seeing max pressure is a tell tail sign of bad se...
07/25/2021

Yesterday we took care of the GT-R that had a bad oil pressure sensor. Seeing max pressure is a tell tail sign of bad sensor. Nissan and other shops recommend going in from the top removing power steering and other things that we did not think was necessary. We instead, supported the engine dropped the cradle a few inches and removed a motor mount and got to the sensor that way. Saving hours over Nissans and other shops quotes to get this job done.

Ready for racemotive
05/17/2021

Ready for racemotive

Installed McLeod RXT twin disc with a T56 Magnum behind it in the Hellion GT. Shifted by an MGW with gripper k**b. ...
05/17/2021

Installed McLeod RXT twin disc with a T56 Magnum behind it in the Hellion GT. Shifted by an MGW with gripper k**b.

Did some fender rolling to fit new forgestar f14 wheels. This was much needed since his LSA SS now make 600whp and trac...
04/29/2021

Did some fender rolling to fit new forgestar f14 wheels. This was much needed since his LSA SS now make 600whp and traction had left the building. With some Mickey thompson tires this SS is ready rip.

Removal of SS dash to send out for holden programming! This will have holden emblems on the radio and dashboard as well ...
04/03/2021

Removal of SS dash to send out for holden programming! This will have holden emblems on the radio and dashboard as well as updated navigation and backup camera!

02/06/2021

Work nights at the shop. Preparing both cars for the first event of the year. Happy Saturday.

Perfect install of eboost gauge in the shop 2016 TT mustang. Dual solenoid. We can now control the boost and raise it up...
12/12/2020

Perfect install of eboost gauge in the shop 2016 TT mustang. Dual solenoid. We can now control the boost and raise it up and down with a few taps of a button.

Methanol pump replacement on the C5 Corvette. Hidden in the fender well of the car, the m**h pump will spray into the in...
11/12/2020

Methanol pump replacement on the C5 Corvette. Hidden in the fender well of the car, the m**h pump will spray into the intake under boost to increase the octane level of fuel and lower intake air temps. **hanol

Disappointing performance at the track. 3 passes and 4lbs of boost from a stuck BOV was enough to shear all the friction...
11/11/2020

Disappointing performance at the track. 3 passes and 4lbs of boost from a stuck BOV was enough to shear all the friction material from the factory clutch. #5.0

We rebuilt a Vortech YSI the other day. Was leaking some oil out of the seals. We did new bearing and seals for the whol...
09/26/2020

We rebuilt a Vortech YSI the other day. Was leaking some oil out of the seals. We did new bearing and seals for the whole blower.

Address

1234 Long Pond Rd
Blakeslee, PA
18610

Website

Alerts

Be the first to know and let us send you an email when Sanita Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category