Slims custom's

06/21/2026

Finally got finishing touches done on the 3rd gen ram dash switch relocate! Had a guy reach out about wanting to use my lower insert for a switch pannel but thats where the exhaust brake and window switch are favtory mounted and wanted to know if I could put them in the upper cubby spot. Designed a block off plate first then figured out how to make the switches fit! Was not easy! Took a few tries 😅 but got it!
Will be up on my etsy page shortly but can customize also if you wanted other buttons in its location

03/22/2026

Little update on our tubing bender! Did this awile ago just realized never posted updated pictures.
Die is now 3/4 metal just printed where the tube sits and metal backed. Not sure dies ever broke before but they deffinitly wont now 😅

03/07/2026

Project i have been working on for awile is almost there!
Scale engine for a 1/14 RC semi i have been redesigning and customizing

01/22/2026

Figured it was time to add my custom gauge pod to the lignup!

This Car Accessories item is sold by Slimscustoms. Ships from Baxter, MN. Listed on Jan 21, 2026

01/19/2026

well lets see how youmagine goes over etsy and cults!
posted up my snowcat files
not a beginner build if you need detailed instructions telling you how to turn a screw or where to put what length screw

Design i started a few years back started out as upgrades for the blizzard but has now changed into its own complete unit!its wider and a hair longer then the blizzard

01/09/2026

Earlier this week a customer needed a L31 ecm programmed for there 98 gmc savana van!
First tried with dealership tools and surprisingly not surprising gm sps couldnt flash the ecm over serial communication but ended up with the oem calibration files and got it flashed on the bench with the newest available calibration.
Old ecm died and I verified that on the bench. Was having a crank start die acting like a vats issue