MB2 Machine & Weld

MB2 Machine & Weld WE BUILD CUSTOM CARS AND PARTS FOR HIGH PERFORMANCE HANDLING .OUR SUBFRAMES ALLOW C5/6 ARMSBRAKES AND

WE BUILD AND SELL SUBFRAMES FOR 1ST AND 2ND GEN CAMAROS,NOVAS
MADE TO ACCEPT C5/6 VETTE COMPONENTS AFTERMARKET STEERING RACK AND COILOVER SHOCKS.

Finished a weld in frt suspension clip for a Hot Rod project.
03/24/2025

Finished a weld in frt suspension clip for a Hot Rod project.

I got the driver side sub frame connector Fabbed & tacked together today on the 93 Z/28 before dinner.
11/24/2023

I got the driver side sub frame connector Fabbed & tacked together today on the 93 Z/28 before dinner.

Started working on the under side of 93 Z/28. Cut off poorly instability frame connectors. We'll start over on those. M...
10/28/2023

Started working on the under side of 93 Z/28. Cut off poorly instability frame connectors. We'll start over on those. Made some re enforcement plates for the frt sub frame connectors. And fitting up rear panhard relocation bracket

Customer brought in a cast aluminum light post yesterday. Nobody else In Douglas county could weld this or even wanted t...
10/19/2023

Customer brought in a cast aluminum light post yesterday. Nobody else In Douglas county could weld this or even wanted to try. When you've been in business for 40 years you gain knowledge on how things need to be repaired.

Aluminum extrusions for a ladder rack hold down clamping lips broken off. Customer wanted them repaired until they locat...
10/18/2023

Aluminum extrusions for a ladder rack hold down clamping lips broken off. Customer wanted them repaired until they locate new pcs. So we welded them up and milled the the clamping lips back into them.

GM 580/LS3,D&D performance Viper 6 speed all mounted together. Machined throw out bearing spacer so the viper unit would...
09/26/2023

GM 580/LS3,D&D performance Viper 6 speed all mounted together. Machined throw out bearing spacer so the viper unit would mate up to LS ZR1 clutch.

Frt a arms built out of 4130 CM tubing for the 93 Z/28. Using a UMI Roadrace K member & quick steer Cardone Rack & pinio...
09/26/2023

Frt a arms built out of 4130 CM tubing for the 93 Z/28. Using a UMI Roadrace K member & quick steer Cardone Rack & pinion.

Got the Corvette ZR1 skf bearings hubs mounted and C6/Z06 brake calipers mounted up. To some 2000 4th Gen spindles.
09/26/2023

Got the Corvette ZR1 skf bearings hubs mounted and C6/Z06 brake calipers mounted up. To some 2000 4th Gen spindles.

Built our own drop in twin fuel pump module for the 93 Z/28. Using twin Aeromotive 340 pumps. Added a DSE stand alone fu...
09/26/2023

Built our own drop in twin fuel pump module for the 93 Z/28. Using twin Aeromotive 340 pumps. Added a DSE stand alone fuel level sender off to the side. Waiting for the fuel filter/regulator to arrive so we can mount it and make fuel lines.

The Yellow Top Optima battery showed up for the 93 Z/28
09/26/2023

The Yellow Top Optima battery showed up for the 93 Z/28

Got the steering column mounted in the 93 Z/28.
09/26/2023

Got the steering column mounted in the 93 Z/28.

Fabricating drop fuel pump unit for 4th Gen Camaro. Dual Aeromotive 340 pumps. Machined Delrin top pc. Std GM locking ri...
06/24/2023

Fabricating drop fuel pump unit for 4th Gen Camaro. Dual Aeromotive 340 pumps. Machined Delrin top pc. Std GM locking ring. Waiting fittings & sealing O-Ring.

Address

Baldwin City, KS

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 12pm

Website

Alerts

Be the first to know and let us send you an email when MB2 Machine & Weld posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to MB2 Machine & Weld:

Shortcuts

Share

Category