https://www.professionallymodifiedvehiclesforsale.com/

Professionally Modified Vehicles For Sale, Atlanta, GA (2026)

08/22/2025

2019 Camaro ZL1 1LE – 936 WHP / 864 WTQ on E85
Price: $75,000
Mileage: 28,000 chassis miles
Build Mileage: 15,000 miles
A10 Transmission
Ownership: Second owner
Condition: Clean CarFax, no accidents

All performance work and maintenance performed by Vengeance Racing. This is a well-sorted, turn-key build with full documentation. It ran 179 MPH at a half-mile event.

Performance Modifications:
Synergy “Race” ported LT4 supercharger
Vengeance Racing CNC cylinder heads
Vengeance Racing billet valve covers
Vengeance Racing camshaft package
Nick Williams 103 mm throttle body
RotoFab Big Gulp intake
DSX billet supercharger lid
2.3” upper pulley
DSX 9.45” lower pulley
ATI harmonic balancer
Atlas port injection system
DSX LTX port injection plates
Triple in-tank fuel system (E85 capable)
Vegeance Racing Flex Fuel Syetem
Katech high-performance oil pump
Mighty Mouse catch can
Vengeance Racing heat exchanger with trunk-mounted ice tank

Drivetrain:
Built 10L90 transmission
4" chromoly driveshaft

Suspension & Chassis:
BMR 15” conversion (Original Rear Brakes Included)
Roll bar with harnesses

Additional Notes:
-Built and maintained exclusively by Vengeance Racing
-Clean and well-maintained inside and out
-All receipts and documentation available
-Serious inquiries only. No trades.
-Video in comments

08/06/2025

***************SOLD**************

***************SOLD**************

***************SOLD**************

2016 C7 Z06
48,### chassis miles
Located in Cu***ng, Georgia
Price: $85,000

Modifications Include:
Cordes 5" Cold Air Intake
Magnuson 2650 Supercharger Plumbed with AN Lines / Fittings
90mm Upper Pulley
Nick 103mm Throttle Body
Vengeance Racing Billet Valve Covers
DSX 9.06" Lower Pulley
LME Built 377 Cubic Inch Short Block
Callies 6.125" Connecting Rods
Wiseco LT4 Forged Pistons
Vengeance Racing C&C Ported Cylinder Heads
Vengeance Racing Custom Cam Kit
RPM Built 8L90E Transmission
Dewitt Single Brushless Fan Kit
Tikt Cooling System
Tikt Rear Wing
Tikt Carbon Hood
Tikt Side Skirts
RPM 6 Point Roll Bar Finished in Carbon
Tillet B1 Carbon Racing Seats
Ballenger Wideband Kit

Invoices available to serious buyers

07/20/2025

1968 Pontiac GTO – One Owner | All Original | 90,000 Miles | Original Window Sticker
Location: Cu***ng, Ga
Price: $42,500 OBO

A rare opportunity to own an unmodified, one-owner 1968 Pontiac GTO with just 90,000 original miles. This true survivor has been garage-kept since new and remains in exceptional, unrestored condition throughout.

Factory original 400ci V8 and TH400 automatic transmission, original paint, interior, and trim—all intact and showing authentic patina. The car runs and drives reliably, with all systems functioning as they should.

Highlights:
– One-owner car with clean title
– 100% original drivetrain and body
– 90,000 original miles
– Original window sticker included
– Garage-kept its entire life
– Well-documented and unmodified survivor

Additional photos and walkaround video available upon request.

06/26/2025

1964 Pontiac GTO – Fully Restored | LS-Powered | Modern Amenities | All Receipts Included
Location: Cu***ng Georgia
Price: $72,500

One of the most iconic names in American muscle, this 1964 Pontiac GTO has been fully restored and tastefully modernized with attention to detail throughout. Finished to a high standard, the car now features LS power and updated systems for improved reliability, comfort, and performance—while still retaining its classic character.

Highlights:
– LS V8 engine
– Full restoration with high-quality components
– Receipts included for all parts purchased
– Modern cooling, brakes, and suspension
– Power steering
– Period-correct Bluetooth radio
– Restored interior with subtle upgrades
– Clean title

This GTO runs and drives flawlessly and is ready for the road or the show field. Additional photos, videos, and documentation available upon request.

03/03/2025

1800+ RWHP STREET DRIVEN Vengeance Racing Twin Turbo C6 Z06

Vengeance Racing built this immaculate C6 Z06 late 2019 / early 2020 for a local client who owns & manages multiple businesses. The car has been to the drag strip ONE TIME since the build was completed and has been stored indoors in a climate controlled environment since (6/5/2021)... Client is too busy to race & maintain the car in the manner it is deserving of. His loss is YOUR gain...

Turn Key 7 second build that can easily be driven on the street. Anyone who knows the TIME & COST to duplicate a build of this caliber will understand the listing price and the benefit of buying vs building.

Vengeance Racing Built 1800+ RWHP TWINTURBO 2007 C6 Z06
Currently Tuned on 93 Octane Fuel & VP X98 Ethanol
Black Exterior (Currently wrapped red as seen in picture, the satin black was the previous wrap)
Black Interior
Mileage 16,971
VIN: 1G1YN2DT1A5801098
$155,000.00 (Negotiable for the right buyer)

Currently scheduled for fresh fluids / spark plugs / fuel / lash adjustment / new tires on all four corners.

Also happy to remove wrap, finish roll cage, or any other items you would like to change or update
We would love to get this car to the track and run it to its potential and will be happy to support the new owner in doing so!!

Engine-
Late Model Engines Built 2000HP 427LSX Long block
-GM LSX Block- SOLID DECK / ReceiverGrooves
-Callies 4" CCW BilletCrankshaft- Long Post
-Dyers 3000M Billet Rods
-Dyers 735A Rod Bolts
-Diamond Custom Pistons
-Trend H-13 .927 Wrist Pins
-ARP Main Studs
-Dailey Engineering Dry Sump OilingSystem- 3 Stage
-ARE Dry Sump Oiling Tank
-ATI Balancer
-ARP 1/2" Head Studs
-Mast 285cc LS7 6 Bolt Cylinder Heads
-PSI 424 Spring Kit
-SCE Copper Gaskets
-256/268 Solid Roller Camshaft
-ISKY Sold Roller Lifters
-Manley 3/8" Pushrods
-T&D Shaft Mount Rocker Arms
-Vengeance Racing Billet Valve Covers
-Late Model Engines Billet LS7 IntakeManifold- Black Anodized with Primary & Secondary Fuel Rails
-Nick Williams "Boosted" 102mm DBW Throttlebody
Turbo System
-Twin Precision 76/65 CEA Billet Wheel Gen 2 Turbochargers .96AR
-Tial Q 50mm BOVs
-Tial MV-R 44mm Wastegates
-Stainless Hotside (Jet Hot 2500Extreme)
-Custom Fabricated Stainless TubularHeaders-Aluminum Cold/Charge Side
-Turbo Werx Exa Pump
-Custom Air To Water Intercoolersystem
-Trunk Mounted HX Tank with Pump
-Co2
Engine Management/Electrical
-Pro EFI 128 ECU
-i Boost Controller
-Pro EFI Can Logger Display
-Race Grade EGT TC8 Kit
-Pro EFI Lightning Ignition Coils
-Pro EFI 4.2 Wideband Kit (Dual)
-Braille 16 Volt Lithium Lightweight Battery x 2 with Charger
Fuel System
-Aeromotive 6 Gallon Fuel Cell
-Aeromotive Brushless 10gpm Spur Gear Fuel Pump
-Aeromotive 30-120 Regulator
-Aeromotive In Line 10 Micron Filter
-220lb/hr Fuel Injectors
-2000cc Fuel Injectors
Cooling
-Meziere "Race" Electric Waterpump
-Dewitt High Capacity Radiator
Drivetrain
-RPM Transmissions TH400/9"Conversion
-DSS 3.5" Couplerless Propshaft
-Pro Torque Gen X Series Torque Converter
-Precision Products TH400 RMVBShifter- Clean Neutral/Air
-B&M Transmission Cooler
-DSS Half Shaft Kit
Chassis/Suspension
-TRZ Outlaw Tubular Front Suspension kit with Manual Rack
-Pfadt Racing Engine & Differential Solid Mounts
-Menscer Double Adjustable Coilover Kit
Safety
-RPM 6 Point Rollbar ( Halo & DashBars included, but not installed)
-Tillet Carbon Fiber RaceSeats/Brackets
-6 Point Harnesses-SafeCraft Fire Suppresion System
- 3 Nozzle-ECS Manual Brake Kit
-Strange Race Brakes Front & Rear
-JBRC Dual Parachute Kit (SpringLauncher)
Wheels / Tires
-Weld S71 15x10 Beadlock Rears
-Mickey Thompson 325/50/15 Drag Radials
-Weld Alumna Star 2.0 3.5" Fronts
-Mickey Thompson 26x4x15 Front Runners
Misc
-Anderson Composites "World Challenge Carbon Fiber Hood"
-Custom Wrap as pictured (OEM GM BlackPaint under wrap)
-Power Master Mini Torque LS Starter

01/08/2025

***************SOLD**************
***************SOLD**************
***************SOLD**************

Big price drop on this perfect multi purpose built ZL1 1LE!!!
Whether you want to road course it, drag race it, half mile it, or take it to dinner, this 1LE can do it all!

2019 ZL1 1LE
ONLY 6,035 MILES
This 1LE laid down 1,319 wheel horse power @ 1,233 ft lbs torque and holds the 6th Gen Camaro 1/2 mile record at 196.6 mph
The smooth boost allows the power level to change from 800 whp to over 1300 whp!

Price: $114,500 OBO

• Late Model Engines LTX 427” Sleeved Aluminum Block
• Large bore CID Cylinder Heads
• Vengeance Racing Billet Valve Covers
• Blueprinted Katech LT4 Wet Sump Oil Pump
• Holley Dominator ECU
• Magnuson TVS2650 Supercharger System
• Smoothboost Boost Controller w/ PWM Control
• JCD Custom “Bigger Gulp” Intake
• Nick Williams 112mm Throttle Body
• ToohighPSI 10 Rib Drive System
• DSX Tuning Lower Pulley
• Griptec 2.75 Upper Pulley
• Vengeance Racing “Hyper Idler” Support System
• Kooks 2” Headers w/ 3 inch X-pipe
• Corsa 3” Variable Sound Exhaust
• Mighty Mouse “Wild” catch can system
• Lingenfelter Big Bore High Pressure Fuel Pump
• Crawford Racing/ Holley Dominator Port Injection System
• ToohighPSI Port Injection Plates
• ID1700x Port Injectors
• Radium Triple Pump Surge Tank
• Aeromotive Fuel Pressure Regulator/ Filter
• Dewitts Direct Fit Radiator
• Vengeance Racing High Capacity Heat Exchangers
• Miller Custom Fab Expansion Tank - Trunk Mounted
• RTS 6XD Sequential Transmission Package
• ACT Twin Street/Race Clutch System
• Precision Shaft Technologies Custom Driveshaft
• DSS Level 5 Rear Axles
• GM A10 ZL1 Rear Differential w/ lockout kit
• RPM Roll Bar
• Tillet Race Seats
• Schroth Harnesses
• Pegasus Systems Novec 1230 Fire Suppression System
• Vengeance Racing 6th Gen Camaro Parachute Kit
• Menscer Coilovers all around
• TBM Brakes all around
• 15 in conversion in rear
• Toe arms
• Caster arms
• Trailing arms

Price Includes OEM 1LE Wheels and Seats and Weld Drag Pack
Have a google drive with all invoices and progress pictures during the build for anyone interested.

12/20/2024

***************SOLD**************

***************SOLD**************

***************SOLD**************

Tis the season
Calling all last minute Christmas shoppers!!!
Not sure this one will fit under the tree, but sure would look great in the garage with a bow on it.

2024 C8Z06
2LZ
Only 800 miles

Revivify Coating all the way around
Eventuri Cold Air Intake
GESI Highflow cats
Forgeline VV1R Wheels

Modifications installed by Vengeance Racing

Price: $142,500 OBO

Located in Cu***ng Georgia

08/15/2024

***************SOLD**************
***************SOLD**************
***************SOLD**************
Antimatter Blue 2021 GT500
ONLY 1,300 Miles
VIN:1FA6P8SJ6M5501256

Modifications (Professionally Installed by Vengeance Racing)
-Kong CNC Ported Factory Supercharger
-Kong 108 mm Throttle Body
-JLT GT500 Cold Air Intake
-VMP 20% OD Balancer Kit
-American Racing Longtube Headers with GREEN cats
-FORE Innovations GT500 L4 Fuel System
-ID1700cc Fuel Injectors
-Brisk RR12 spark plugs
-Tuned on Ignite Ethanol Fuel by Palm Beach Dyno (Includes HP Tuners RTD Devicewith 93 octane & ethanol tune files)

Price: $92,500
Price is negotiable

08/06/2024

***************SOLD**************
***************SOLD**************
***************SOLD**************

WORLD RECORD HOLDING 1/2 MILE NATURALLY ASPIRATED C5 Z06!!!
FEATURED IN MULTIPLE PRINT & ONLINE MAGAZINES OVER THE YEARS
199.7MPH 1/2 MILE
This 451 cubic inch small block LS produces over 1100HP on the stand and right at 920RWHP on our chassis dyno!!!! This is right at 2.44HP per Cubic Inch!!!!!!!!!
2002 C5 Z06
Modifications Include
Engine
-Late Model Engines 451 Cubic Inch Long block 16.5:1 Compression
-LSR Aluminum Block- Tall Deck
-Callies Billet CCW 4.100 58x Crankshaft
-MGP Aluminum Rods
-Diamond Custom Pistons
-60mm Roller Bearings
-Custom Solid Roller Camshaft
-Jesel Belt Drive
-ARP Top to Bottom
-Mast Motorsports "Mozez" Gen II Max Effort Cylinder Heads
-Jesel Rocker Arm System
-Mast Motorsports "Mozez" Intake Manifold Fully Port Matched
-Twin 8500 4 Barrel Throttlebodys
-Dailey Engineering Dry Sump Oiling System
-Peterson Dry Sump Oil Tank with Internal Heater
-Peterson Oil Filter Block With Primer Pump
Cooling
-Block is filled/Heads Flow Water
-High Flow Aluminum Radiator w/ Electric Fan
-Electric Water Pump
Fuel System
-5 gallon Aeromotive cell with 5 GPM pump.
-Aeromotive regulator/post filter
-Siemens 220 lb/hr injectors
-Tuned on M1 Methanol
Engine Management
-Pro EFI 128 Pro Mod/Dealer ECU
-Motec C127 Dash/Logger/Display
-Pro EFI High Output Coil Packs
-Race Grade TC8 EGT Kit
-16 Volt Light Weight Battery (No Alternator)
Drivetrain
-Motor plate & Mid plate
-Pfadt Race Engineering Solid Differential Mounts
-Monster Clutches custom light weight multi disc clutch
-Driveshaft Shop Couplerless Propshaft
-C6 Torque Tube
-C6 TR6060 with PPG Sequential Gearset built by RPM Transmission
-RPM Transmission C6 ZR1 Differential 3:90 Ratio
-Driveshaft Shop 1/2 Shafts
-SKF Hubs with ARP Studs
Chassis | Suspension | Safety
-TRZ Tubular Front Suspension | Cradle | Control Arms
-Motion Control Systems Remote Reservoir Coilover System
-10 Point Chromoly Custom Roll Cage
-Removable Momo Steering Wheel
-Parachute
-Kirkey Seat
-5 Point Harness
-Fire Suppression Systenm
-Optic Armor/Lexan x all four corners
-15" Kit for Rear Suspension
-Custom Mini Tubs to allow for 30" Tire Fitment
-Flared Quarter Panels for 30" Tire Fitment
-Drag Wing
-VFN Single Piece Front End with Custom Forward Facing Scoop
-Carbon Fiber Interior Door Panels
-Battery Relocation with NHRA Style Electrical System Kill
-Manual Brake Kit
-Strange Race Brakes Front & Rear
-Line Lock

03/16/2024

***************SOLD**************
***************SOLD**************
***************SOLD**************

Our newest listing features a beautiful, low mileage, silver C6 Z06.

2008 Corvette Z06
20,700 Chassis Miles
4,700 Miles on Build
6 speed manual
Exterior color: Silver
Interior color: Black/Tan
VIN: 1G1YY26E285116429
2 Owners With Zero Accidents

Laid down a nice 572 whp @ 501 ft lbs of torque

Modifications:
Vengeance Racing Stage 4 NA Performance Package
Ported MSD AirForce 102mm Intake Manifold for LS7
Nick Williams 103mm Throttlebody
Halltech Cold Air Induction System
VR CNC Ported LS7 Heads
VR Cam Kit
ATI LS7 10% Underdrive Balancer
Mighty Mouse “Wild” Dry Sump Catch Can System
Monster LT1-S Twin Disc Clutch
Premium Package
24 LB Billet Steel Flywheel
36” Speed Bleeder
Billet Bearing Release
Stainless Longtube Headers with Catted X-Pipe
VR Heat Sleeves
Johnson Lifters

Price: $53,000 OBO

All VR Invoices will be loaded on a flash drive and delivered to buyer.

Purchase Included:
Red Valve Covers
Stock Shifter
Stock Radio
Uninstalled Sound-Deadening Kit

03/14/2024

***************SOLD**************
***************SOLD**************
***************SOLD**************
Everyone loves a good ole square body… but how about a LSA SUPERCHARGED squarebody with a custom built TR6060 Transmission that produces over 500RWHP on 37" Tires?!!??!?!

1985 Chevrolet K85 1/2 Truck

LSA Supercharged Engine (Aluminum V8 from Gen II CTSV)
Custom TR6060 6 Speed Manual Transmission
4WD Fully Operational

GM LSA Engine
-Includes Aftermarket camshaft & Supporting Hardware

Custom Fabricated Cold Air Induction
Nick Williams Throttlebody
Motion Raceworks LSA Billet Throttle Cable Bracket
Lokar Throttle Cable
Mighty Mouse Catch Can System
Wegner Billet LSA Accessory Drive
ATI SFI Balancer

Magnum TR6060 Manual Transmission TZ 4x4 2.97 Ratio, 31spl. M/S .80 .63 OD
RPS Twin Carbon Clutch Kit

LSX Aluminum Radiator Kit
-Dual Fans w/ Shroud
-Dual Heavy Duty Relay Wiring Kit

C&R Heat Exchanger
Shearer Fab 7 Gal Water Tank w/ Davies Craig Pump (Mounted in Bed)

Ultimate Headers "Swept Back Design" GM LS Swap Long Tube Headers
Custom 3" Stainless Exhaust
Borla XR1 Sportsman Mufflers

Twin Walbro In Tank Fuel Pumps
Spectra Premium Squarebody 1987 + Sending unit for LS and EFI
Dual Fuel Tanks with Transfer Switch in the cab

Holley Dominator ECU
Holley Engine Harness
Holley Smart Coils
NTK Dual Wideband Sensors
Holley 3 Bar MAP Sensor

Interior
Syndicate Series by Dakota Digital VHX Instrument Cluster
Vintage Air AC System

Suspension
6" BDS lift kit
-Fox 2.0 dual shocks for front
-Dual Fox 2.0 steering stabilizer kit
-frame support kit
-new 56" rear leaf springs
-hardware kit for leaf springs
-Anti-Sway Bar Shackle Link Kit

OE Style Dana 44 Stud and conical Washer Steering arm Install kit
Leaf Spring Shackle Kit
Front Sway Bar Drop Kit
Skyjacker Brake Line Front, Stainless Steel Lifted Height of 4"-6"

Price: $58.750.00

01/03/2024

***************SOLD**************
***************SOLD**************
***************SOLD**************
Up for sale is a beautiful, Vengeance Racing built 2019 Cadillac CTS-V. This V has 23,### miles on the chasis and right around 7,### on the build itself

93 Pump Gas: 861rwhp / 763rwtq
E85: 921rwhp / 763rwtq

Modifications:
Roto Fab Cold Air Intake
Nick Williams 103 mm Gen V Throttle Body
Magnuson 2650 LT4 Super Charger
Vengeance Racing Billet LT Valve Covers
Vengeance Racing CNC Ported LT4 Cylinder Heads
Vengeance Racing Cam Kit
ATI Balancer Kit
DSX 9.06 Lower Pulley
DSX Auxilary Fuel System
FIC 30% GDI Fuel Injectors
Lingenfelter Big Bore DI High Pressure Fuel Pump
Mighty Mouse Catch Can System
Weapon X "Triple X" Heat Exchanger
Kooks 2" Longtube Headers
Kooks 3" Competition Connection Pipes

Price: $85,000
Price is negotiable
Video in comments

Professionally Modified Vehicles For Sale

08/22/2025

08/06/2025

07/20/2025

06/26/2025

03/03/2025

01/08/2025

12/20/2024

08/15/2024

08/06/2024

03/16/2024

03/14/2024

01/03/2024

Address

Telephone

Website

Alerts

Contact The Business

Shortcuts

Share

Category