D Mark Performance

D Mark Performance DMP is your local source for any Ford performance work, dyno tuning, and car builds.

Operating as usual

Excited to announce another new addition to the shop. We will now have 4th axis machining capabilities
01/10/2019

Excited to announce another new addition to the shop. We will now have 4th axis machining capabilities

Some more Cobra jet intake port work
01/05/2019

Some more Cobra jet intake port work

Finally got in a much needed piece of equipment for the shop, nice 4 post lift.
12/27/2018

Finally got in a much needed piece of equipment for the shop, nice 4 post lift.

Dyno tune on a 2011 GT. Crate motor, boss manifold, bbk t body and JLT carbon. Made some really good numbers for the set...
05/19/2018

Dyno tune on a 2011 GT. Crate motor, boss manifold, bbk t body and JLT carbon. Made some really good numbers for the setup, 433whp and 373wtq corrected. Stock exhaust minus axle back.

05/19/2018
GT500 dyno tune

Full exhaust and tune GT500, 533whp & 542Tq (stock pulley)

This is the custom CAI i build for CJ mani setups.
05/05/2018

This is the custom CAI i build for CJ mani setups.

This is the custom CAI i build for CJ mani setups.

D Mark Performance's cover photo
05/05/2018

D Mark Performance's cover photo

07/24/2017

Just as a heads up, if trying to get a hold of us, i will try and get back to you guys in the morning or evening. Christina's dad had a stroke last week and she will be out for the next 3 weeks helping him recoup. He is doing good otherwise. Thanks

Mike.W.Dirty'01
06/12/2017

Mike.W.Dirty'01

T56 repairs/upgrades
06/12/2017

T56 repairs/upgrades

This is a lot of various examples for some of the porting and clean up i do on the intakes as well as shaving and painti...
06/12/2017

This is a lot of various examples for some of the porting and clean up i do on the intakes as well as shaving and painting of the intakes

This is a lot of various examples for some of the porting and clean up i do on the intakes as well as shaving and painting of the intakes

Joe's.AC.Cobra
06/12/2017

Joe's.AC.Cobra

Craig.FRPP
06/12/2017

Craig.FRPP

Fender rolling
06/12/2017

Fender rolling

Dyno runs/tunes
06/12/2017

Dyno runs/tunes

07/12/2016

For those who havs tried to call, please email any questions to [email protected] Phones are down currently, until Comcast can resolve the outage

Doing some Holley EFI tuning on this beautiful Camaro.
03/24/2016

Doing some Holley EFI tuning on this beautiful Camaro.

As a little update, DMP is now a dealer for
03/21/2016

As a little update, DMP is now a dealer for

Little dyno tuning on this mach with FiTech
03/17/2016

Little dyno tuning on this mach with FiTech

One of my favorite colors on the Boss. Just a simple spring install but had to snap a pic.
03/17/2016

One of my favorite colors on the Boss. Just a simple spring install but had to snap a pic.

D Mark Performance's cover photo
03/15/2016

D Mark Performance's cover photo

If you guys could take a minute and vote, got a DMP customer and friends car in the auto show looking to rack some votes...
02/17/2016
Justin Draper

If you guys could take a minute and vote, got a DMP customer and friends car in the auto show looking to rack some votes up on. Thanks!

http://bit.ly/1RGI6hJ

Justin Draper • Classic Car Club Voting

Doing some baseline runs on this '15, that comp orange looks amazing.
02/02/2016

Doing some baseline runs on this '15, that comp orange looks amazing.

Timeline Photos
02/02/2016

Timeline Photos

Wrapped up some tuning on this turbo Bullitt. Hellion single with a host of other mods to compliment the new power.
01/18/2016

Wrapped up some tuning on this turbo Bullitt. Hellion single with a host of other mods to compliment the new power.

Nice DMP built turbo motor getting ready for some action next year
11/16/2015

Nice DMP built turbo motor getting ready for some action next year

Clean SN that came into the shop a ways back for some maintenance. From simple maintenance to custom turbo kits and moto...
11/16/2015

Clean SN that came into the shop a ways back for some maintenance. From simple maintenance to custom turbo kits and motor builds, we do it all

N/A tune on a 3v
11/07/2015

N/A tune on a 3v

Raptor dyno, no problem. Beastly dyno for a beast of a truck, love me some SVT.
08/14/2015

Raptor dyno, no problem. Beastly dyno for a beast of a truck, love me some SVT.

A little NA coyote action going down, them revs
08/14/2015

A little NA coyote action going down, them revs

What better way to calibrate a speedo, love me some notch
08/05/2015

What better way to calibrate a speedo, love me some notch

Almost there! Should be doing runs tomorrow for equipment testing. Just have to throw some paint on the plates and get t...
07/20/2015

Almost there! Should be doing runs tomorrow for equipment testing. Just have to throw some paint on the plates and get them mounted.

Sticking along on schedule so far with the dyno install. Pouring the concrete slab tomorrow, then forming walls. Looking...
07/11/2015

Sticking along on schedule so far with the dyno install. Pouring the concrete slab tomorrow, then forming walls. Looking for dyno to be in next Friday so the concrete has some good cure time, then some minor wiring and testing of operation. Another ton of rock coming in early tomorrow, with rebar and mesh laid In the before concrete arrives.

Well, looks like the lift i picked up for the shop is too big and need a smaller 4 post. This is for sale, for anyone in...
07/02/2015

Well, looks like the lift i picked up for the shop is too big and need a smaller 4 post. This is for sale, for anyone interested or maybe knows somebody. Also i have fork lift access and can load it onto a trailer if need be. It includes two air/Hyd center jacks (although one shown) and requires 220V for the motor and air for the locks to operate. It does not include any slip plates, but is fully functional otherwise. The lift is torn apart and all parts are here. $4500 OBO

Here's a pdf link for info on the lift, although it says 12k its for a newer lift rated a little higher http://www.snaponequipment.com/…/12000%20SERIES/12000%20SER…

Address

2436 E Oakton St
Arlington Heights, IL
60005

Telephone

+18476212265

Alerts

Be the first to know and let us send you an email when D Mark Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to D Mark Performance:

Videos

Nearby autos & automotive services


Other Automotive Customizing in Arlington Heights

Show All

Comments

Drew, i have one of your original CAIs for the CJ manifold. is the PMAS better than the 4.5" i have now?
Once again Drew Markowski exceeds my expectations...I recently installed a new intake and smaller pulley and then took my car to drew to be re-tuned... I can't be happier with the results and the level of customer service he always provides