Revision Zero

17/09/2026

🤩Revision Zero are proud to have worked with Taziker on the Huddersfield Station Footbridge as part of The Transpennine Route Upgrade (TRU) in the UK. With the project now erected on site, it's great to reflect on the hard work our team put into this project and to see our model and drawings come to life. 🏗️

🔸2no 14-metre spans
🔸3no support columns
🔸3no staircases
🔸3no lift shafts
🔸2no finger canopies
🔸Lift motor room steelwork
🔸SFS integration

For us, seeing the steel on site is a reminder that every drawing has a purpose, every connection matters, and every detail contributes to the bigger picture.

Well done to the team 👏🏼

15/09/2026

☀️ A recent project from the Revision Zero drawing office!

A smaller project for us, delivered for the Kerang Solar Park in Victoria - but no shortage of detail! From modelling through to fabrication drawings, our team delivered everything needed to take the steel from model to site. 🏗️

🔩 15 tonnes of steel
🛠️ 287 linear metres of handrail
📐 171 m² of grating

Check out the model below 👇🎥

10/09/2026

Project Complete ✅
Revision Zero has successfully delivered the detailing package for the BlueScope Waste Gas Heat Recovery (WGHR) Ducting project. 🏗️🚧

‼️Take a closer look at the 3D model video below to see the scale and detail of this project for yourself. 📽️⬇️‼️

This project was completed as part of the Blast Furnace Reline Project at BlueScope Steel's Port Kembla Steelworks in New South Wales, Australia. It involved the steel detailing of industrial ducting and associated steel components forming part of the plant's Waste Gas Heat Recovery system. The project supported the routing and management of process gases within the existing steel manufacturing facility, contributing to improved efficiency and reliability of the plant's heat recovery operations.

The project comprised multiple ducting systems and associated steel components requiring accurate detailing and coordination to suit the complex industrial environment. The Blast Furnace Gas Ducting was designed to convey blast furnace gas generated during the ironmaking process between key process areas, enabling controlled gas transfer within the plant system. The Waste Gas Ducting facilitated the movement of high-temperature exhaust gases through the heat recovery process, allowing thermal energy to be captured and utilized. The Combustion Air Ducting provided the required airflow for combustion processes, supporting efficient operation of the plant equipment.
In addition to the primary ductwork, the scope included saddles, vertical supports, and control valve replacement assemblies, requiring detailed coordination to accurately represent the complete steelwork package and its interfaces with the existing infrastructure.

Revision Zero's scope of work included detailed 3D steel plate modelling, fabrication drawings, and construction documentation for approximately 600 tonnes of steel ducting, and miscellaneous supports. The project-specific detailing scope included:

Inclusions:
📌 Blast Furnace Gas Ducting
📌 Combustion Air Ducting
📌 Waste Gas Ducting

The completed detailing package provided fabricators and construction teams with accurate, coordinated information necessary for the fabrication, assembly, and installation of the ducting systems and associated steel components.
Revision Zero is proud to have contributed to the successful delivery of the BlueScope Waste Gas Heat Recovery (WGHR) Ducting project, demonstrating the company's commitment to engineering excellence, precision, and high-quality structural steel detailing for complex industrial facilities.

Revision Zero - Precision in Every Detail 📐🖥️📝

27/08/2026

National Heroes Day – Philippines

Revision Zero will be closed on Monday, 31 August, as our Philippines team observes National Heroes Day (Araw ng mga Bayani).

National Heroes Day is an opportunity to remember and honour the courage and sacrifices of the many Filipinos who contributed to the country’s freedom, independence and development — not only the well-known national heroes, but also the countless individuals whose contributions helped shape the Philippines.

It’s an important day of remembrance and national pride, and an opportunity to reflect on the values of courage, service and unity.

Our Philippines operations will resume as normal on Tuesday, 1 September.

We wish our team, their families, our clients and everyone celebrating a meaningful National Heroes Day. 🇵🇭

20/08/2026

Friday, 21 August, is Ninoy Aquino Day in the Philippines, a Special Non-Working Holiday commemorating the life and legacy of Senator Benigno “Ninoy” Aquino Jr.

The day marks the anniversary of his assassination on 21 August 1983, upon his return to the Philippines after several years in exile. His death became a significant moment in Philippine history and helped galvanise the movement that ultimately led to the People Power Revolution in 1986 and the restoration of democratic institutions.

While we recognise and respect the significance of this day, Revision Zero will remain fully operational on 21 August, with our Manila team working as normal.

For our clients and partners, it will be business as usual — our project teams will remain available, detailing and production will continue, and scheduled project commitments will proceed as planned.

We also thank our Revision Zero team for their commitment and support in working through the holiday.

🇵🇭 We acknowledge Ninoy Aquino Day and its place in Philippine history while continuing to support our clients and projects around the world.

18/08/2026

Another successfully completed project by the Revision Zero team — Thornlie–Cockburn Link Main Drain Crossings, forming part of Perth’s METRONET Thornlie–Cockburn Link in Western Australia.

Revision Zero provided the structural steel detailing, fabrication drawings and construction models for the access and support steelwork associated with the main drain crossing structures along the new rail corridor.

Our scope included approximately:
• 5.30 tonnes of structural steel
• 28.31 linear metres of handrails
• 30.2 m² of grating

The detailing package covered UC support beams, Webforge landings and grating, fabricated trash racks, Webforge handrails and gates, stair stringers and stair supports.

While relatively modest in tonnage, projects such as this demand the same attention to coordination, constructability and detailing accuracy as much larger structures. Every connection and interface needs to be clearly resolved to support efficient fabrication and installation.

We’re proud to have contributed to another important piece of Western Australia’s transport infrastructure and to the wider METRONET Thornlie–Cockburn Link project.

Well done to everyone involved.
Revision Zero — Precision in every detail.

13/08/2026

WE’RE HIRING – IMMEDIATE START

Revision Zero has positions available for immediate start.

If you’re looking for your next career opportunity and would like to join the Revision Zero team, we’d love to hear from you.

Apply through JobStreet:
https://ph.jobstreet.com/job/93955296

Or send your CV directly to:
[email protected]

Please feel free to share this post with anyone who may be interested.

Responsible for producing accurate models and drawings in accordance with standards, client requirements and maintaining disciplined quality practices

11/08/2026

🎓 Revision Zero is proud to celebrate our latest graduate – Janess Masion!

Last week, Janess graduated with a Bachelor of Science in Civil Engineering, an achievement that marks the culmination of years of hard work and dedication.
Janess is the third student Revision Zero has supported through their college education all the way to graduation. Our support goes beyond financial assistance. We believe strongly in giving students the opportunity to gain meaningful, practical industry experience alongside their studies.

Over the past five years, Janess has spent her school holidays undertaking work experience with Revision Zero, gaining valuable exposure to the industry and becoming part of our team long before graduation. Now, with her degree completed, we are delighted to welcome Janess to Revision Zero full-time as one of our Construction Modelers.

We are incredibly proud of what Janess has achieved. This isn't the end of her journey with Revision Zero — it's the beginning of an exciting new chapter. We look forward to continuing to support her development, helping shape her career, and watching her grow as a professional in the construction and engineering industry.

Congratulations, Janess! We are all very proud of you. 👏🎓

🎥 Enjoy this short video celebrating Janess and her graduation — a very proud moment for Janess, her family, and everyone at Revision Zero.

29/07/2026

Project Spotlight | InfraBuild NDC Warehouse Extension – Newcastle, NSW
Revision Zero is proud to have contributed to the successful delivery of the InfraBuild NDC Warehouse Extension in Newcastle, New South Wales, Australia.

Located within the Port of Newcastle precinct, the project forms part of InfraBuild's integrated steel manufacturing and distribution hub, enhancing warehouse capacity to support the storage, handling, and movement of steel products while strengthening one of Australia's key steel logistics facilities.

Our scope involved the detailed modelling and documentation of approximately 48.40 tonnes of structural steel, interfacing seamlessly with a 3D survey scan of the existing facility to ensure accurate coordination between the new and existing structures.

Revision Zero's services included:
• 3D Structural Steel Modelling – Development of a fully coordinated Tekla model integrated with the existing building survey data.
• Fabrication Drawings – Production of detailed shop drawings for structural steel members, connections, and associated fabrication requirements.
• Roof and Wall Sheeting Detailing – Documentation of roof and wall sheeting systems, including support members, fixings, and connection components.
• Installation & Demolition Sequence Plans – Preparation of sequence marking plans to assist safe, efficient, and coordinated site installation and demolition activities.
• Construction Documentation – Delivery of comprehensive er****on drawings and project documentation to support fabrication and on-site construction.

By combining advanced 3D modelling with accurate detailing and thorough coordination, Revision Zero helped ensure the structural steel package could be fabricated and installed efficiently, minimising site risk and supporting a smooth project delivery.

We are proud to have supported another important Australian industrial infrastructure project, demonstrating our ongoing commitment to delivering high-quality structural steel detailing, BIM, and engineering documentation.