HBI Engineering

HBI Engineering Steering and suspension reconditioning specialists. From vintage cars, racing cars, trucks, buses, forklifts, cranes to heavy earth movers.

Remanufactured another set of Fendt tractor outer tie rods a lot cheaper than new joints. We made brand new balls/tapers...
21/06/2026

Remanufactured another set of Fendt tractor outer tie rods a lot cheaper than new joints.
We made brand new balls/tapers and inner seats, all case hardened. They are like a brand new joint now, greased and ready to go.
See in the photo the old balls/tapers and inner seats standing upright next to the completed joints.

New inner tie rods for Massey Ferguson tractor made onsite. Parts made in our CNC lathe and then assembled. We copied an...
19/05/2026

New inner tie rods for Massey Ferguson tractor made onsite. Parts made in our CNC lathe and then assembled. We copied an original parts. 

We rebuild a lot of truck and bus drag links for many customers throughout New Zealand and some for Australia. We make n...
26/03/2026

We rebuild a lot of truck and bus drag links for many customers throughout New Zealand and some for Australia.
We make new inner seats, balls/tapers made in our CNC machine and supply new springs and dust boots. We have a case hardening kiln for truck and bus joints.

Mercedes truck drag link. Remanufactured with all new internal parts made onsite in our CNC lathe. Case hardened ball an...
25/02/2026

Mercedes truck drag link. Remanufactured with all new internal parts made onsite in our CNC lathe. Case hardened ball and inner seat. For $505 plus gst, for both ends of joint. We add grease ni***es, which customers like. Ready for COF. A very good product at a very good price. Truck and bus joints are our main business.

Just wanted to put out there that we also make bushes to suit. This bush (in red) is for a Suzuki. They couldn’t buy thi...
24/02/2026

Just wanted to put out there that we also make bushes to suit. This bush (in red) is for a Suzuki. They couldn’t buy this one, the part was obsolete. Done for $155 plus gst.

Made a new Chevrolet C10 drag link to match a sample mock up a customer made. I made it out of 45mm EN36A material and m...
22/11/2025

Made a new Chevrolet C10 drag link to match a sample mock up a customer made.
I made it out of 45mm EN36A material and machined it to shape. Heated and bent to the right angle, then re-heated to normalize the steel. Milled the flats and added the correct tapers. Very tricky and time consuming with all the bends and angles.

Made a new Winnebago fixed tie rod. As the old tie rod was almost worn through and no longer repairable. The new fixed t...
22/10/2025

Made a new Winnebago fixed tie rod. As the old tie rod was almost worn through and no longer repairable. The new fixed tie rod was made from EN36A material 60mm diameter.

Reconditioned UD sway bar joints. We upgraded the inner seats with case hardened steel seats. Making them last longer an...
30/09/2025

Reconditioned UD sway bar joints. We upgraded the inner seats with case hardened steel seats. Making them last longer and added grease ni***es as customers prefer this option. Better than original joints.

Here we make a new subframe bush for three Nissan Skylines. Nissan Fuga’s are very similar. Each bush is push out and su...
23/09/2025

Here we make a new subframe bush for three Nissan Skylines. Nissan Fuga’s are very similar. Each bush is push out and subframe measured as they can very in diameter. Bush housings are made to measure. Then inner parts machined and assembled.

Made a new Dodge drag link from sample supplied. Made from a solid piece of round bar. We like to add a few millimetres ...
14/05/2025

Made a new Dodge drag link from sample supplied. Made from a solid piece of round bar. We like to add a few millimetres to the thickness when we can, without losing the look of the original. We also use good quality material.

Address

31 Epsom Road
Sockburn
8042

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 4pm

Telephone

+6433483624

Website

Alerts

Be the first to know and let us send you an email when HBI Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to HBI Engineering:

Shortcuts

Share

Category