Maggy the Land Rover

Maggy the Land Rover Updates about restoring my Land Rover Series 3
Also check my instagram and blog to see more details.

Transmission brake overhauled and installed.
28/04/2024

Transmission brake overhauled and installed.

Brake master cylinder assembly is in. Had to do some grinding to get it all in the right position.Should I paint the ped...
21/04/2024

Brake master cylinder assembly is in. Had to do some grinding to get it all in the right position.
Should I paint the pedals green or keep them black?

Last bit of spaghetti work before it goes back on the car.
20/04/2024

Last bit of spaghetti work before it goes back on the car.

Wishing you all happy holidays from the garage! Thank you for following the project as we go in to the 4th yeah😮 lot's o...
25/12/2023

Wishing you all happy holidays from the garage! Thank you for following the project as we go in to the 4th yeah😮 lot's of work is waiting but it's already looking like a car again. Hoping for the first drive under it's own power before the summer😃

It took soem effort with a ratchet strap, but the bulkhead is in position. Already feels very solid with the steering bo...
12/09/2023

It took soem effort with a ratchet strap, but the bulkhead is in position. Already feels very solid with the steering box connected.
Lots of small bits still to do before the first drive.

Engine and gearbox are in! It feels good to finally put stuff back together instead of taking it apart. Next: driveshaft...
02/09/2023

Engine and gearbox are in! It feels good to finally put stuff back together instead of taking it apart. Next: driveshafts, steering box, radiator assembly, fueltank and brakes. Hoping to make a test drive this year :)

Today, after 3 years, it was time to get the chassis rolling again. Feels amazing! Next steps: probably engine and gearb...
20/08/2023

Today, after 3 years, it was time to get the chassis rolling again. Feels amazing!
Next steps: probably engine and gearbox, steering, fueltanks etc.

Front axle in position, it's starting to look like a car again!
14/08/2023

Front axle in position, it's starting to look like a car again!

After painting it looks definitely better! Next step, leafsprings and axles.
15/07/2023

After painting it looks definitely better!
Next step, leafsprings and axles.

Testfitting the bulkhead on the  chassis,.... it didn't fit.Looks like I have to drill out the connection point and weld...
11/06/2023

Testfitting the bulkhead on the chassis,.... it didn't fit.
Looks like I have to drill out the connection point and weld it back in the correct place this time.
Should have tested before painting, but it's an easy fix so not to worry to much!

Adres

Esbeek

Meldingen

Wees de eerste die het weet en laat ons u een e-mail sturen wanneer Maggy the Land Rover nieuws en promoties plaatst. Uw e-mailadres wordt niet voor andere doeleinden gebruikt en u kunt zich op elk gewenst moment afmelden.

Snelkoppelingen

Delen

Type