ウェブサイトとは何ですか？

CLUB13b.COM

By Rotary Fanatic

14/06/2024

05/11/2019

ＲＥＡＬＴＡＬＫ

When most people think of Subaru they think of a purebred AWD rally car, with the four-cylinder boxer engine and that unmistakable exhaust sound that we all know and love.

But this my Club13B crew is not your normal Subaru WRX, this is a fully fledged Frankenstein on Steriods, Owned by Mofab LLC in Colorado USA, these guys are home to The worlds first ALL WHEEL DRIVE twin turbo 13B powered Subaru GC8 that’s right it’s still ALL WHEEL DRIVE, Not only that it’s also running a STI 6 speed trains with custom billet trans-adapter Retaining all of the factory STI running gear.

Coupled with the 13B are Twin Garrett G series 660 turbos and a Full aem electronics vehicle package putting all 420hp to the 4 wheels with a showroom stock 13b tuned on e85.
With testing completed of the full set up Mofab are looking to push the power to over 600hp at the wheels and will be a serious contender for the 2020 time attack season in the US.

Check out the spec sheet below

Make: 2000 Subaru gc8

Engine | Fuel :
Factory built 13B
Electric water pump
return ptfe fuel lines custom stainless hardlines for fuel and oil through out.
Radium fuel filter and rails and regulator
Twin bosch 044 fuel pumps radium surge tank -8 supply -6
Fuel injector clinic 2150cc injectors x6.
Elite rotary inlet manifold
Hks race bov
Custom intercooler pipes
Custom swirl pot
Custom air oil separator
Built to apex oil pan
Full function engineering emap canister
Twin Garrett g series 660 turbos
Single tial v60 waste gate
321 ss turbo manifold wrapped w incolnel heat shields
3.5” titanium exhaust
Custom intercooler and radiator setup
Twin setrab oil coolers

Driveline :
Sti 6spd trans
Custom trans adaptor
Exedy twin disk clutch
Map dccd controller
Custom trans mount custom front cross member

Steering | Brakes | Suspension:
Manual rack
BC coilovers
Brembo brakes carbo tech pads
Deleted abs

Interior | Exterior :
8pt roll cage carbon roof carbon hood chassis mounted rear wing carbon from splitter composite rear diffuser
Full aem electronics vehicle package. Vdm dash
Ecu and coils. Ecu master pmu custom Motorsport harness. Chillout systems driver cool suit.
Fire safe fire suppression system. race tech seat

Wheels | Tyres :
Enkei rpf1 wheels
Toyo r888 295/30/18

Cars tuned on e85 with a showroom stock 13b @420 whp. Looking for reliable 6-650 package for 2020 time attack season

***Currently seeking sponsorship for engine and trans support.

25/05/2018

ALL FOR THE STREETS OF TRINIDAD

This clean FC3S Rx7 built in-house at Stephen Rotary Works by Father and son team in down town Trinidad,

This beautifully presented 13b mild port turbo Rx7 is a perfect combo for the street, with the focus on using all the trusted parts, internally the engine runs Rotary aviation Apex seals & E&j corner seals.
Keeping the engine feed with E85 are the Bosch 2200cc secondary injectors with 550cc primaries and Walbro 450 e85 pump flowing thru -8 supply and -6 return braided lines
Running Haltech e8 to keep the vitals in check & running perfectly pushing out on full tune around the 430hp at the wheels💯
Other upgrades include an Electric hydraulic power steering mod which deletes the large OEM power steering pump keeping the engine bay neat.
The Custom widebody is also done in house with a Shine auto body kit & Carbon fiber s4 spoiler to finish off the look
Inside the is a full Bride interior that complete the OG Japanese street spec look that we all love.

FANATASTIC BUILD ✔️

Owner: Stephon Nicholas Jagroop

Head over to there shop page and give them a like
https://www.facebook.com/Stephen-rotary-works-365775653451078/

06/08/2017

________PURE_STREET_DOMINATOR________

A Cult Car that has and will stand the test of time, Michael has built this masterpiece to bully the competition be it on the street or on the track.
PERFECTION 💯

CLUB13b Profile

OWNER : Michael Haggarty

COUNTRY : Australia

MODEL : Mazda rx7 s8

ENGINE : 13btt

SUSPENSION :xyz coilovers

WHEELS: WORK VSXX
18X10 18X12

BODY KIT: FEED SIDE STEPS
RE AMEMIYA DIFFUSER

MODIFICATIONS : CUSTOM WIDE BODY, 3.5 SMB STAINLESS EXHAUST, POWERFC,

EXTRA INFO: 280HP

Photographers Props :
Bryce forrest, Kevin nyguen, Craig english.

29/07/2017

R E S P E C T ★ T O ★ T H E ★ F A L L E N

This car was built as a tribute to the original owner Samuel Harrison who was a long time friend of Dave's. He had huge hopes of building something special, Unfortunately he passed away suddenly so the project never really got off the ground. Dave took it upon himself to build this WORK OF ART with a promise to honour Sam's memory and make his dream a reality. RESPECT 💯

CLUB13b Profile

OWNER : Dave Matehaere

COUNTRY : New Zealand

MODEL : 86 FC3S

ENGINE :13b Extend port turbo

SUSPENSION : Mix of BC and partshop max

WHEELS: Work Miester 2p 18/9@-28 front and 19/10.5@-30 rear.

BODY KIT: BN sports blister kit.

MODIFICATIONS : Large extend ported S4 13b, FD intake, FD 5spd, Twin plate clutch, 1680cc injectors, T61 turbo, V mount cooling set up, Davis Craig EWP, 44mm wastegate, Link RX ecu, Tomie FPR, Bride seats, To much more to list.

EXTRA INFO: Fully street legal and regularly driven.

23/07/2017

★ CLUB13b FANS ★
We want to Showcase your Rotor, From every corner of the globe. CLUB13b World Wide Rotary Alliance wants to share your pride and joy with the world..........Each week we will select a Car to profile and post it up - PM us for more info. We'd love to hear from you!!

27/08/2016

OWNER : Taketeru Seki

COUNTRY : Japan

MODEL : SAVANNA RX-7 FC3S Infini 3
Body color : Mazda soul red premium metallic
★ wheel: Formula mesh 15inc (front, 10-40
Rear, 11j-27

F fender: D-MAX +20 wide fender + N-style type7 +40 over fender
R fender: D-MAX +30 wide fender + N-style type8 + 60mm over fender

R spoiler .rocketbunny s13 6666 duck tail

FORSIGHT roof spoiler

GANADOR full carbon mirror

FORESIGHT roof spoiler

Tail lights: Crystal Corporation made LED tail + Smoke specification

Front lip spoiler Fujita engineering

08/06/2016

CLUB13b WORLD WIDE ROTARY ALLIANCE : CLUB13B. COM sticker decal logo.
This decal sticker design is exclusive to club13b and can only be purchased here.
To be part of the ever growing Worldwide Rotary Alliance get your decal today and represent!

The decal is suitable for all flat surfaces including cars, windows, furniture, toolboxes & luggage etc.
You are only limited by your imagination!
Sticker size: 33cm long x 9cm wide
Uv resistant, high quality and superior adhesion.

Be apart of the world wide crew........and represent your ROTARY passion!

GET YOURS HERE

https://www.ebay.com.au/ulk/itm/322137475392