KSM fabrications

KSM fabrications Specialise in custom stainless exhausts, full systems, manifolds, decats and cat backs aluminium pipe work and welding inc, alloys,rocker covers breathers

Full 2.5” stainless system done on a 300bhp tdi Quattro A4. Full system including down pipe with stainless flexi and v-b...
05/03/2023

Full 2.5” stainless system done on a 300bhp tdi Quattro A4.
Full system including down pipe with stainless flexi and v-band, straight through centre section into 3” inward rolled tips rear section also fitted with v-band for easy install and removal all fully tig welded

Full 2.5” stainless system fabricated on this immaculate ek9, mugen twin loop back box modified and shortened to fit alo...
05/01/2023

Full 2.5” stainless system fabricated on this immaculate ek9, mugen twin loop back box modified and shortened to fit along with a centre resonator to reduce drone! 4” stainless induction arm also fabricated with a ram-air foam cone filter massive improvment in low down power with a lovely cross over over standard system and air box
Thanks again for the work!
For any enquires PM the page

Full 2.5” system finished on an EP3 civic, with removable cat on vbands and decat pipe made up into a HKS hi power back ...
07/07/2022

Full 2.5” system finished on an EP3 civic, with removable cat on vbands and decat pipe made up into a HKS hi power back box

Alloy wheel repaired for a customer, wheel was previously repaired incorrectly by someone and cracked right on the weld ...
04/04/2022

Alloy wheel repaired for a customer, wheel was previously repaired incorrectly by someone and cracked right on the weld again! The repair looked good on the outside but once I started to prep the wheel I could see exactly why the repair failed you will see why in the pictures. All wheels are repaired to a very high standard using the correct methods for any repairs like this please get in touch either on messenger or WhatsApp👍🏻👍🏻

2.5” stainless cat back dome on an is200 today👌🏻
18/09/2021

2.5” stainless cat back dome on an is200 today👌🏻

2.5” stainless cat back system and front mount intercooler fitted and piping done recently on a mk4 gsi Astra
28/02/2021

2.5” stainless cat back system and front mount intercooler fitted and piping done recently on a mk4 gsi Astra

2.5 inch down pipe and 1.5 inch screamer pipe fabricated for an immaculate b18 turbo Ek9
22/10/2017

2.5 inch down pipe and 1.5 inch screamer pipe fabricated for an immaculate b18 turbo Ek9

Full 70mm stainless exhaust using existing middle box into custom rear silencers with turned down tips and b-series ram ...
07/10/2017

Full 70mm stainless exhaust using existing middle box into custom rear silencers with turned down tips and b-series ram horn manifold b modified to suit h22 accord

Full stainless system into powerflow backbox on this mint e30 BMW
07/10/2017

Full stainless system into powerflow backbox on this mint e30 BMW

Full 2.5" stainless steel exhaust with decat and middle box delete fulyl tig welded into a spoon n1 backbox on an altezz...
07/10/2017

Full 2.5" stainless steel exhaust with decat and middle box delete fulyl tig welded into a spoon n1 backbox on an altezza

3" intercooler piping done on an s14 Silvia
07/10/2017

3" intercooler piping done on an s14 Silvia

Address

Sligo

Website

Alerts

Be the first to know and let us send you an email when KSM fabrications posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category