28/10/2014
Λάμπες H.I.D. (XENON) : Κεραμικό υλικό στην βάση της λάμπας!!!Ποιοτικά καλώδια απο σιλικόνη!!!Μεταλική βάση σε όσες λάμπες ενδείκνυται!!!Κωδικός (λογότυπο) στο εσωτερικό της λάμπας για την γνησιότητα της (διαφορετική ποιότητα).
Παρακάτω αναγράφεται η ποιότητα των υλικών που χρησημοποιείται. . . .
1.Quartz tube from Germany:Pure,UV cut
2.Metal halide from USA
3.Xenon gas from USA
4.Electrode from Austria
Λάμπες που δεν κυκλοφορούν στο ελληνικό εμπόριο...στο εξωτερικό μόνο απο τις καλύτερες και ακριβοπληρωμένες εταιρείες.
Ballast : What is Program control Ballast?
Ballast is the use of programmable chip integrated program designed to control the circuitry, which allows the product to maintain sustained and stable performance. To be programmed in advance to predict the state of the lamp and matching parameters and corresponding countermeasures designed to allow program-controlled ballast and bulb matching more intelligent. Programmed to automatically detect the lamp ballast pipe pressure, recency, performance status, and other parameters, and the obtained information related data of the lamp, provided the best match the corresponding parameters in order to make up the matching between the two good performance.
Program Control Ballast Different from normal ballast
♦Integrated ignition coil
Minimize unnecessary line losses
♦Intelligent three ignition
1:Ensure startup Xenon lights in normal,When detected, the lamp is not lit, it will automatically be second, third light, make sure the lamp is lit, do not need to re-open.
2:Easily solved when the light bulb light and sometimes does not light, and the issue can not light of two bulbs at the same time.then improve traffic safety.
♦LED Status indictor to show and check the working status
Long bright light Working properly
* Continuous flash time 1 Supply voltage is too low, check the power supply line
** Continuous flash time 2 Supply voltage is too high, check the supply voltage
*** Continuous flash time 3 Bulb not connected
**** Continuous flash time 4 Lamp voltage is lower than 45V,pls replace the bulbs
***** Continuous flash time 5 Lamp voltage is greater than 150V,pls replace the bulbs
Indicator is not lit Power not connected, output short circuit or ballast self-locking?pls replace the ballast