Commercial Bodies & Repairs Ltd

Call Website

Commercial Bodies & Repairs Ltd Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Commercial Bodies & Repairs Ltd, Automotive repair centre, 51 Algores Way, Wisbech.

Road Transport Expo set up is well underway with just a bit more cleaning to do and then stocking up the fridge with som...
29/06/2026

Road Transport Expo set up is well underway with just a bit more cleaning to do and then stocking up the fridge with some nice cold drinks for what looks like a few warm days ahead!

Come along and meet the team on stand P8b where we have a couple of stunning trucks on display, both fitted with our insulated tippier bodies.

The countdown is on! Next week we will once again be exhibiting at the Road Transport Expo. This year we will have our n...
22/06/2026

The countdown is on! Next week we will once again be exhibiting at the Road Transport Expo.
This year we will have our next generation insulated bodies on display, complete with bespoke extruded rails along with our one piece hardened deck sheet.

To find out more about our tipper bodies see one of the team on stand P8b.

We hope to see many of you there.

🟠When: 30th June - 2nd July
🟠Where: Stoneleigh Park, Warwickshire
🟠Why: The one-stop industry event that’s all about the truck and everything related to it

JOB ALERT!Due to recent expansion and an increasing order book we are looking to fill the following positions,🟠Aluminium...
05/04/2026

JOB ALERT!

Due to recent expansion and an increasing order book we are looking to fill the following positions,

🟠Aluminium body builder
🟠Body fitter/gear fitter
🟠Repair engineer

Experience with commercial vehicles and tippers bodies is preferred but not essential so if you are looking for a new challenge please send your CV to [email protected]

Another stunning Scania UK fitted with our insulated tipping body.This one is hitting the roads of South Wales this week...
31/03/2026

Another stunning Scania UK fitted with our insulated tipping body.

This one is hitting the roads of South Wales this week moving aggregates and asphalt for A.Duffin under the colours of Breedon. A big thanks to Peter Harris and the team at Keltruck Scania for making the process easy and massive thanks to Andy for trusting us with this build.

🟠Edbro tipping gear
🟠 PM weigher
🟠Shur-Co UK Limited sheeting system
🟠Dawes warning board and CH8 board

For more information on our tipping bodies give one of the team a call

🟠Jamie Boyce - 07359 421554
🟠Paul Hickson - 07854 187454

Nothing beats a trip to Cornwall to see a happy customer with his new tipper.This DAF XD 8x4, supplied by the great team...
03/03/2026

Nothing beats a trip to Cornwall to see a happy customer with his new tipper.

This DAF XD 8x4, supplied by the great team at Adams Morey, looks amazing in the colours of A.R.Haddy & Son of Tideford.

Another great example of our insulated body, this one left un painted showing off the quality build by George and Dean, fitted with

🟠Shur-Co UK Limited Wraptor sheet
🟠Edbro tipping gear
🟠VPG PM1155 weigher
🟠Dawes CH 8 panel
🟠Commercial Safety Systems Ltd body watch
🟠one peice floor

A massive thank you to Richard Haddy and his team for the order along with Adrian Baker and the team at Adams Morey for making the process so easy.

For information on our bodies please give one of the team a call,

🟠Jamie - 07359 421554
🟠Paul - 07854 187454
🟠Gavin - 07704 159338

Another CBR body out the door and this one is heading north of the border to our friends at JC Bell, a massive thank you...
30/01/2026

Another CBR body out the door and this one is heading north of the border to our friends at JC Bell, a massive thank you to Gavin Bell for trusting us with this build.

This Renault Trucks chassis, supplied by Stacey Campbell, is fitted with a 4’6” insulated body ready to move aggregates and asphalt around the roads of Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿.
The body is built with our one piece floor, new and improved top and bottom rails, Edbro tipping gear, VPG PM1155 weigher, Shur-Co UK Limited sheeting system and finished off with cameras fitted by Commercial Safety Systems Ltd

For more information on our bodies please give one of the team a call,

🟠Jamie Boyce- 07359 421554
🟠Paul Hickson - 07951 557562
🟠Gavin Spooncer - 07704 159338

What a start to the year for us at CBR! We have had this new Renault Trucks 8x4 chassis leave us for our friends at RH C...
17/01/2026

What a start to the year for us at CBR! We have had this new Renault Trucks 8x4 chassis leave us for our friends at RH Commercials and Fenland Fresh Logistics Ltd.
This is the first of four we are building in this batch and is also the first of our new and improved insulated body.

This body has been built by our father and son team, Andy and George, with our all new bespoke top rail and bottom rail which gives us that smooth, sleek design while maintaining a solid yet lightweight body. The body also features our one piece floor which comes as standard on all of our builds. This floor is not only more durable, but also user friendly by avoiding build up around floor joints and avoids that dreaded bitumen leaking through split welds!

This vehicle has been fitted with an Edbro tipping gear, VPG PM1155 weighing system, Shur-Co UK Limited sheeting system, Dawes People Panels sidgeguard and CH8 boards and finished off with full Holcim paint and livery.

For more information on our bodies and how we can help your fleet please give Jamie a call on 07359 421554 or email [email protected]

A massive thank you to all of our customers, suppliers and friends for everything in 2025. We finished the year strong a...
01/01/2026

A massive thank you to all of our customers, suppliers and friends for everything in 2025.
We finished the year strong and we look forward to working with you all again in 2026. This coming year is an exciting one for CBR, a healthy order book on new bodies well into Q3 and some exciting expansion plans which will be happening in a few weeks time!

Here’s to a prosperous and exciting year ahead.

Numbers one, two and three into TEG Haulage since the summer. Complete with Edbro tipping gears, VPG weighers, Dawbarn W...
23/11/2025

Numbers one, two and three into TEG Haulage since the summer.

Complete with Edbro tipping gears, VPG weighers, Dawbarn Wraptor sheeting systems, Dawes people panels side guard boards and CH 8 boards and completed with cameras fitted on site by CSS.

A massive thank you to everyone at TEG Haluage for trusting us with these builds along with Mick and the team at Renault. It was a pleasure working with you all on these!

Renault Trucks
Edbro PLC
Dawbarn & Sons Ltd

🟠🟠 JOB OPPORTUNITY BASED IN WISBECH🟠🟠Due to a growing order book and increasing demand for our service department we cur...
22/11/2025

🟠🟠 JOB OPPORTUNITY BASED IN WISBECH🟠🟠

Due to a growing order book and increasing demand for our service department we currently have vacancies for the below positions

🟠 new build body fitters ~ this role will involve preparing new chassis’ ready for body fitment and then finishing the body fit with wings, sheeting systems etc.

🟠 repair engineer ~ this role will be in our busy repair bay carrying out general repairs and servicing to tipper and mixer body work, hydraulic repairs, and body swaps.

A background in working on tippers or mixers is preferred but full training will be provided to the right candidates.

CBR is a fast-paced, hands-on workshop where no two days are the same.
You’ll be joining a team who take pride in their work with a can do attitude where our reputation is built on great customer service.
If you thrive in a dynamic setting where your skills are valued, your ideas are heard, and you can see the impact of your work every day, our busy workshop is the perfect place.

For more details or to apply please contact Jamie or Gavin

[email protected] or [email protected]

Address

51 Algores Way
Wisbech
PE132TW

Alerts

Be the first to know and let us send you an email when Commercial Bodies & Repairs Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share