D D R Custom Motorcycles

28/10/2025

With Matchbook Custom – I just got recognised as one of their rising fans! 🎉

28/10/2025

New item from the laser.
Wall sign for Lounge or garage. Made from 3.4mm Rosewood ply, you could paint it if you want.
Approximately 600mm long .
Custom made with your Name. £15 plus postage.

18/09/2025

Customer had a bike come in with a broken Stainless exhaust, broken in two repaired by the owner using a steel band some exhaust paste and a jubilee clip.
Back in the workshop got it all cleaned up tacked and welded , dressed the welds and polished up .
Looks a 100 times better.

22/02/2025

Update on the Cam Am rack.
Back from the powdercoater. All put together for a test fit with all the stainless steel hardware.

18/02/2025

My customer Pete, Wanted a carrier for his Can Am . Unfortunately we can not use one of my normal Can Am carrier's, so I have had to redesign it,
Luckily I have Great new bit of kit. With the Arcdroid I can draw it out on the sheet trace round it and then hit cut.
This now allows me to offer custom cut brackets etc.
Just send a cardboard template with all the details on hole centres etc I can trace it and cut.

15/02/2025

At Matchbook Customs today
With the Bobber.

24/11/2024

Well, At last, I have finished my fabrication on the Trike.
Just waiting for collection.

Send a message to learn more

10/11/2024

Coming to the end of the trike build.
Sent to on the electric Box.
First one had the battery in as well. However when I got the block in I run out of room.
So back to the drawing board.
With limited space and needing access, I came up with a. Drop hinge.
I have installed clips 2 modules and the fuse box with the drop hinge we are able yo get to the fuses.

12/10/2024

Busy week in the workshop.
Customer wanted a set on custom bars with a point at the front.

Started off with the risers, there needed copeing at 45degs. I then pulled the double tight bends , using the JD2 bender.
1.75 dia 3mm wall tube .
Just did not want straight bars.

Needed to mess about with the bandsaw to get the angle for the point.

All tubes were drilled for concealed wiring.

Something a little different from the norm.
Turn out pretty good even if I say so myself.

03/10/2024

With Matchbook Custom – I just got recognised as one of their top fans! 🎉