Damageundone_howto

28/04/2022

Check out the new antistatic gun

Atex approved and NO charging of a battery required

L-Tec

Wir stehen in den Startlöchern... 🤩

01/08/2020

Neat kit to perfectly cut out the holes for parking sensors in new

by

21/06/2020

⁣Here’s a little introduction to GUIDE COATS & why you should use them.

Over the years I have tried several different brands, the principles behind them are the same but they have all performed slightly differently..⁣⁣
FOLLOW ME ON INSTAGRAM FOR MORE TIPS AND TRICKS
www.instagram.com/damageundone⁣⁣

06/06/2020

I know some of you may have seen bits of this when I did my intro on static guns but I thought I would make this video for you focusing actually on the static and how to eliminate it. .
.de

22/05/2020

So many companies unnecessarily replace bumpers with this kind of damage 🤦‍♂️

With a little skill and know how they can be repaired and this is how I do it 👍🏻

03/05/2020

WIN A COLAD PLASTIC WELDING KIT

A massive thanks to COLAD for teaming up with me to give you this opportunity to allow one of you to win this great cold plastic welding kit below:

KIT INCLUDES:

1 x 50ml 30 sec 2k Plastic Adhesive
1 x 50ml 1.5 min 2k Plastic Adhesive
1 x 50ml 3 min 2k Plastic Adhesive
1 x 500ml Plastic Cleaner
1 x 200ml Plastic Primer
1 x Pack of Contour Film
1 x Pack of Reinforcement Mesh
1 x Metal Cartridge Gun

RULES TO WIN:
1) LIKE & REPOST
2) FOLLOW & .co
3)TAG .co & 3 friends
4) USE THE HASHTAG:

GOOD LUCK 😉

CLOSES: SATURDAY 9th May 2020
Sorry but due to shopping restrictions this giveaway is only open to the UK & EU


@ Damage Undone Ltd

23/04/2020

I found these top tips from about causes of contamination from when vehicles and I wanted to share them with you all. I believe there is something for everyone to learn from their tips and I hope you like the way I have presented it 👍

19/04/2020

In my last cold video I showed you how to repair a hole in a bumper, this time it’s a crack that runs to the edge of the bumper. Again I am using the .co range because it is comprehensive and has impressed me so much.

I hope you enjoy the video and please feel free to ask me anything you are not sure about. 😉

FOLLOW ME ON INSTAGRAM FOR DAILY STORIES & MORE VIDEOS

www.instagram.com/damageundone

10/04/2020

For a while now I’ve been promising to make a video showing the products and techniques I use to get my seamless fade outs. 👍🏻

I know that we all have our own ways of doing it but this is what works for me ....... what’s out for the TIPS list at the end 😉


.de .co

05/04/2020

▪️for those who don’t me ▪️

As a lot of you may know I am a massive believer in and my previous experiences with cold products have been disappointing. So when .co offered me the opportunity to try their system I thought why not? 🤔

I was really impressed and I will definitely include it as a repair option. This system will also work well on PUR plastics 👍🏻

.co

28/03/2020

♦️SORRY - DUE TO A TECHNICAL GLITCH I HAVE HAD TO UPLOAD THIS AGAIN - OOPS 🤦‍♂️ ♦️

This video is for repairers who do not take bumper off and focuses on how to plastic weld a punch hole from the outside 👍🏻

28/03/2020

For those of you who don’t follow the page here is my latest video.

It’s aimed to help repairers who DON’T take bumper off get a stronger better repair.

Any questions please just ask 😉