https://www.facebook.com/297815084248381/

Stolton Engineering

Home
United Kingdom
Dorset
Stolton Engineering

*Automotive Fabrication*
*TIG & MIG Welding*
*Motorsport Preparation*
*General Servicing & Repairs*
*Vehicle Transportation*
*Custom Exhaust Systems*

08/03/2024

We had .vts clean saxo down for a custom stainless steel centre exit exhaust 😎

20/02/2024

A while back we had Arran’s Peugeot 106 in for fitting a bolt in full rollcage. Reinforcement and mounting plates welded into the body. Rear floor painted and dash trimmed. Looking fresh 😎

06/02/2024

We had Phil’s lovely SR20DET powered Nissan S12 in last year for the following…

• New rear disc and pads
• New timing chain cover
• Sump reseal
• New rear differential
• Pre Mot check over

28/11/2023

K24 Type R Civic owned by in for a new rear silencer to quieten things down for track

25/10/2023

We had Arran’s 106 in a while back for head gasket replacement due to a external oil and coolant leak. Head gasket replaced with a MLS rather than a stock fibre gasket.

Thanks to for sorting us out with a head skim

#106

11/09/2023

Mercedes G-wagon in for a Stainless steel side exit and finished off with some black tips 😎

12/07/2023

Lovely clean and original example of a BMW E12 525.

In with us for the following:

• Full vehicle check over
• Engine oil and filter
• Fuel filter
• Air filter
• Distributor cap and rotor arm
• NGK spark plugs
• Gearbox oil change
• Rear differential oil change
• Genuine bmw radiator
• Longlife antifreeze change
• x4 Brake flex pipes
• Brake and clutch fluid flush

#525

05/05/2023

We had Dominic’s K20 turbo powered R56 mini track car project in a while back for a Full stainless exhaust system and external waste gate.

10/04/2023

We had Marc’s lovely R32 GTR in for a few bits…

- Full vehicle check over.

- Rear differential unit replaced with a Kaaz 1.5 due to old unit having excessive wear and causing a vibration.

- Brake master cylinder replaced due to a leak.

In time to enjoy this summer 😎

07/03/2023

We had the Honda S2000 return for a supercharger upgrade…

TTS Performance Rotrex C38-94
Supercharger oil cooler
Custom fabricated boost pipes
Grams 1000cc injectors
Walbro 255 intank fuel pump
Turbo-smart Blow off valve
Speed factory racing MAP sensor
Hondata FlashPro
Battery relocated to the boot
Fuse box relocated for boost pipes

Base map uploaded from the tuner and engine sounding mega 😎

27/02/2023

We had Ethan’s Toyota MR2 in for a custom Stainless Steel exhaust system.

08/02/2023

Another underside restoration carried out on Lloyds e46…

- Underside fully stripped.
- Weld in reinforcement plates for rear subframe mounts.
- Fully underseal vehicle.
- Rear K Brace
- Suspension powdercoated.
- Reassembled with polyurethane bushes.
- Strongflex engine/ gearbox mounts.
- Ultra racing front/ rear Anti roll bars
- HEL braided brake lines
- Finished off with one of our own custom 3” Stainless Steel exhausts.

Address

Dorset

Website

facebook.com

Alerts

Be the first to know and let us send you an email when Stolton Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Stolton Engineering:

Shortcuts

Want your business to be the top-listed Cars & Car Service in Dorset ?