GP Systems Ltd

GP Systems Ltd Electronic hardware and software design
Automotive control system design
Race car / bike wiring and sensors

Here we are at a grey Silverstone for some testing ahead of racing this weekend
12/06/2026

Here we are at a grey Silverstone for some testing ahead of racing this weekend


Steve Cooper’s Peter Baldwin tribute spaceframe came back for some electrical modifications. Some of these were due to t...
09/06/2026

Steve Cooper’s Peter Baldwin tribute spaceframe came back for some electrical modifications. Some of these were due to the engine being replaced with a Ford BDH (as used in Peter’s original car). The wiring to the crank sensor and alternator needed extending, and new wiring was added due to there now being an electric water pump. Other mods included moving the jump battery connector and replacing the mechanical speedo with an electronic GPS unit.


She’s back…Magic loom extenders at the ready 😁
31/05/2026

She’s back…
Magic loom extenders at the ready 😁



Steve Cooper’s BDH engine has finally made it to the dyno. This engine will be fitted to the Peter Baldwin special saloo...
10/05/2026

Steve Cooper’s BDH engine has finally made it to the dyno. This engine will be fitted to the Peter Baldwin special saloon tribute car. All engine and dyno adapter wiring was made by GP Systems. Looking forward to the complete car coming back to us for some extra wiring additions and modifications.

This is a dyno adapter loom that was created to connect to the engine loom of Steve Cooper’s new BDH engine (for the Pet...
16/04/2026

This is a dyno adapter loom that was created to connect to the engine loom of Steve Cooper’s new BDH engine (for the Peter Baldwin tribute spaceframe). Also included is an extension cable for the crank sensor. This will be a temporary solution until I can modify the engine loom.


I think I’ve found the problem 😂Probably need to reconfigure the gear shift strategy 😉
13/04/2026

I think I’ve found the problem 😂
Probably need to reconfigure the gear shift strategy 😉


Not the weekend I had hoped for! A small error of judgement during qualifying resulted in me hitting another car. So, fo...
12/04/2026

Not the weekend I had hoped for! A small error of judgement during qualifying resulted in me hitting another car. So, for that, I got a five place grid penalty and three points on my race licence. A bit harsh, but it seems to be the norm these days.
The first race was going well until I got sideways on oil dropped by another car. I lost a lot of time and eventually ended up finishing in 15th place.
Race 2 started well until both of my engine stabiliser bars came adrift and I had to retire as the car kept jumping out of gear.
So now I have a shed load of repairs to do as well as finding time to do some “real” work. Next race is at Snetterton… if I can get it all sorted in time 😳

Address

Derby

Website

Alerts

Be the first to know and let us send you an email when GP Systems Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to GP Systems Ltd:

Shortcuts

Share