Pete’s Lomax Page

18/09/2026

This would make a great project. Amazing that you can get every part to built a Mehari from scratch!

https://www.facebook.com/share/v/1Dcbpsd4Cx/?mibextid=wwXIfr

05/09/2026

The wonders of chatgpt…..

The Lomax is pretty much spot on, but I look 40years younger and never had that much hair…..

31/08/2026

Found an early Haynes manual under the seat of my Lomax when taking them out for replacement.

Printed in 1981, obviously used by its original owner. I’d just bought a new version, printed 1998, when I found it, sods luck I didnt find it earlier.

Anyway, I’ve found a mistake in it, so feel I should write to Haynes so they can recall all copies of the 1981 version, I think they’ll be pleased as I’ll be saving them some embarrassment, I imagine there’ll be a reward innit for me 👍

For those interested, the diagram showing carb float adjustment in the 1981 shows the measurement line at the top of the float, whilst stating 18mm distance.

The 1998 version correctly shows the measurement line through the centre of the float 👍

Ive amended my copy for the benefit and gratitude of future generations….

31/08/2026

My latest toy, an Ultrasonic Cleaning Bath 🙂

Rescued it from a skip at work a couple of years back and its sad in shed ever since.

Used it on my carb refurb, amazing difference, a brilliant bit of kit.

Was extolling its virtues to my buddy Phil who rides old British bikes, he turned up last night with a front wheel hub he want to rebuild, so we gave it a go.

Temp at 55deg, ran it for about 30mins. Needed a very light wire brush and water rinse-off, he’s well pleased!

Before and afters:

25/08/2026

So, having dried the carb afters its ultrasonic bath, I noticed some wear damage on the top half. On closer inspection I can see a hole in the carb body.

This was covered in oil before, glad I cleaned it now, putting it back damaged would have been annoying!

Not the best photo but you can see the hole roughly in centre of photo.

25/08/2026

So today I have discovered the joy of the ultrasonic cleaning bath !

Stripped the solex down, not been cleaned in its history I reckon, as I want to put a 130 jet in it (currently a 125)

I rescued an ultrasonic from a skip at work, so thought I’d give it a go.

Big improvement, before and afters below.

25/07/2026

Outing in the sun, Spaxton village show, a white-knuckle 800yds 🤣

08/07/2026

08/07/2026

Who knew that the Lomax 223 was available as a Fixed Head Coupe🙂

14/06/2026

So, since my last post, looking forward to a new workshop, it all went a bit pear shaped…….planners told me I couldn’t have a nice sexy double garage as it would look out of place 🙄

So, whilst obviously cursing them with boils, suppurating sores and a perpetually itchy arse, I’ve had to come up with Plan B.

Behold, a folding trike cover!

And behold againest, a shed/small workshop!!

Not ideal, but free of the burden of planning permission………

And beholdeth a thirdst time, my overbearingly large motorhome, approx a metre taller than the garage would have been, now welcoming visitors to the area 🤣