JTI Motorsport

JTI Motorsport JZ engine specialist
Engine building, fabrication, servicing, mechanical restoration

Freshly built 2JZ GTE for a mk4 supra now back with the customer. CP pistons, Manley rods, BC 264 cams, BC springs etc
27/06/2026

Freshly built 2JZ GTE for a mk4 supra now back with the customer.
CP pistons, Manley rods, BC 264 cams, BC springs etc

23/06/2026

🌶

22/06/2026

We made 805bhp to the wheels on E50 fuel with Sam Oliver Barnes jzx100. 35c in the dyno cell with no weather correction on the graph so theoretically another 20-30bhp more on a normal day. Props to Mike @ 0x33 at SRD 👏

Fully built 1JZ by us, with the spice 🌶
Dave Yandell on the machining
GRANNAS RACING T56 gearbox conversion
Garrett G35 1050
Syvecs ECU
Walton Motorsport manifold

VENDOSSA lovely S15 in for rectification work after destroying a HKS triple plate clutch, thanks to another garage not f...
19/06/2026

VENDOSSA lovely S15 in for rectification work after destroying a HKS triple plate clutch, thanks to another garage not fitting the correct spigot bearing. Nismo supercopper mix twin plate going in and a few other bits and pieces

16/06/2026

Max Williams Enjoying his 8HP gearbox swap 😅

05/06/2026

Up next on our spree of dyno sessions 😈

Solid day today doing power runs with the 1JZ 8HP E36 build, 32degrees in the dyno cell but still made a solid 553bhp to...
27/05/2026

Solid day today doing power runs with the 1JZ 8HP E36 build, 32degrees in the dyno cell but still made a solid 553bhp to the wheels 👌

2JZ S13 that we built a few years ago. Originally with a R154, now fitted with a BMW 8HP70 setup. Stock bottom end, 272...
21/05/2026

2JZ S13 that we built a few years ago. Originally with a R154, now fitted with a BMW 8HP70 setup. Stock bottom end, 272 cams. 573bhp and 507lbft to the wheels. 325bhp and 475lbft at 3500rpm 👌

Insitu valve stem seal replacement. Abit of a surgical job to be certain all of the old valve stem seals pieces are out,...
07/05/2026

Insitu valve stem seal replacement. Abit of a surgical job to be certain all of the old valve stem seals pieces are out, especially when the rear cylinder is buried under the fire wall of 1JZ Chevy pickup truck

Three 2JZ engine builds back from machining and ready to build. Busy few weeks ahead in the engine room!
21/04/2026

Three 2JZ engine builds back from machining and ready to build. Busy few weeks ahead in the engine room!

Address

Unit A, Hartleywood Farm
Bordon
GU359JR

Website

Alerts

Be the first to know and let us send you an email when JTI Motorsport posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category