Amoy I-oring Co.,Ltd

15/10/2014

PTFE Coated O Ring
an external o-ring coating that is dry to the touch.It provides excellent adhesion and friction properties compared to traditional PTFE coatings.It does not rub off easily,comes in an array of colors,and unlike PTFE does not leave behind visible residue.Different color available
Benefits :
• Extremely low insertion force for easier installation,
• Greatly improves adhesion compared to traditional PTFE,
• Eliminates coating from bonding/sticking to high temperature plastic,
• Can be used in some dynamic applications where traditional PTFE would not be
recommended,
• Comes in an array of contrasting colors to eliminate in-plant errors.
Recommended: Static radial sealing fluids,some dynamic applications,Color identification.

06/10/2014

back to work after one week holidays

08/09/2014

The Day every year, the moon is completely full,that's Chinese Middle Autumn Festival!! And the moon cake represent the full cake as well,standfor the family gathering.Happy Middle Autumn Festival to all Chinese and Chinese overseas friends!

03/09/2014

02/09/2014

Mid-Autumn Festival in Xiamen is not only for the moon cake eating and family gathering,but also the lucky dicing game for the inspiration,not gambling

01/09/2014

COMPRESSION SET

Description: The seal exhibits a flat-sided cross-section, the flat sides correspoding to the mating seal surfaces.

Contributing Factors: Excessive compression. Excessive temperature. Incompletely cured elastomer. Elastomer with high compression set. Excessive volume swell in chemical.

Suggested Solutions: Low compression set elastomer. Proper gland design for the specific elastomer. Confirm material compatibility.

30/08/2014

COMMON SEAL FAILURES
ABRASION

Description: The seal or parts of the seal exhibit a flat surface parallel to the direction or motion. Loose particles and scrapes may be found on the seal surface.

Contributing Factors: Rough sealing surfaces. Excessive temperature. Process environment containing abrasive particles. Dynamic motion. Poor elastomer surface finish.

Suggested Solutions: Use recommended gland surface finishes. Consider internally lubed elastomers. Eliminate abrasive components.

[email protected]" rel="ugc" target="_blank">www.i-oring.com,email:[email protected]

29/08/2014

COMMON SEAL FAILURES
ABRASION

Description: The seal or parts of the seal exhibit a flat surface parallel to the direction or motion. Loose particles and scrapes may be found on the seal surface.

Contributing Factors: Rough sealing surfaces. Excessive temperature. Process environment containing abrasive particles. Dynamic motion. Poor elastomer surface finish.

Suggested Solutions: Use recommended gland surface finishes. Consider internally lubed elastomers. Eliminate abrasive components.

28/08/2014

A failure analysis should be an open-ended process, what implies that the motivation of the executer should not be to blame a certain party but to find the true causes of the failure and to avoid them in the future. Therefore, an independent testing institute has all the prerequisites that are necessary to carry out a good and effective failure analysis. This fact may explain that more than 1000 failure analysis during the past 12 years, whereby more than 500 of them concerned O-rings or O-ring-like seals (Xrings, rectangular rings). In the following, the failure causes are being analyzed, without talking about the characteristics of the damage causing mechanisms in detail. The goal of this article is to describe the actual situation concerning the failure causes of O-rings so that the right conclusions to avoid O-ring failures can be drawn. This article doesn’t explain how the results were achieved in particular. For this purpose, the attendance of specific trainings, as offered by O-Ring Prüflabor Richter and others, is recommended.

28/08/2014

Do you involve rubber o ring? We always provide the high performance rubber o ring with competitive price.Can you take a moment to check my profile and website www.i-oring.com reference with your current situation, maybe you can find the opportunities to enhance your performance and competition. If you are not in the position, can you so kind to forward the message to the responsible person?