GDX Performance

13/05/2026

GTB15-22 Bearing housing - turbine housing gasket Inconel 718 C section C-ring

Material Inconel 718 C’ section steel gasket for …

15/04/2026

New type performance hexagonal drive mechanism and non-exposed screw nut clamp

1. Integrated locking mechanism with maximum strength. The standard bolt and nut version consists of a screw rod and a separate nut. The load points are dispersed, and the nut is prone to loosening due to vibrations. This type of hexagonal design features a single-piece locking mechanism (typically an “hex-driven eccentric cam/integrated screw,” where the nut is directly integrated into the clamp ear mount, with no external protrusion)....

1. Integrated locking mechanism with maximum strength. …

03/04/2026

New Model K42 Turbo Core 53429886913 53429706913 X00036208 5342 988 6913 0070969099 Chra Cartridge for Marine Ship

21/10/2025

G30 G30-900 Billet Turbo Compressor Wheel for 880693-5003s Turbochargers 61.75/76.6mm

21/10/2025

Turbo Upgrade GT3582R 5+5 blades Turbine wheel shaft 700933-0001 for 714568-0001 714568-0002 turbochargers

21/10/2025

Turbo Upgrade G30-900 5+5 blades upgrade Turbine wheel shaft 879615-2 For 880693-5001S 880693-5002S turbochargers

21/10/2025

Turbo upgrade 5+5 blades G30-770 Turbine wheel shaft 879615-2 for 880693-5001S 880693-5002S 880693-5003S

21/10/2025

Turbo upgrade 5+5 blades G30-660 Turbine wheel shaft 879615-2 For 880693-5001S/880693-5002S turbochargers

21/10/2025

Turbo Upgrade 5+5 baldes GTB2260VK Turbine wheel shaft 758353-0005 for turbochargers

18/04/2025

G40-900 0.85a/r T4

G25,G30,G35,G40,G42,G50,G57 ball bearing turbo in stock.

10/04/2025

The A/R (Area/Radius) value is a crucial design parameter for turbocharger turbine housings, especially in twin-scroll configurations. For a twin-scroll turbine housing: ‌Definition‌: A = the cross-sectional area at the turbine housing inlet (volute throat area) R = the radius from the turbo's centerline to the centroid of that area A/R = The ratio between these two measurements (cm²/cm or in²/in)...

The A/R (Area/Radius) value is a crucial design parameter for turbocharger turbine housings, especially in twin-scroll configurations. For a twin-scroll turbine housing: ‌Definition‌: A = the cross…