RPM POWER Engine Management Canada/USA

RPM POWER Engine Management Canada/USA Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from RPM POWER Engine Management Canada/USA, Cars, Vancouver, BC.
(1)

Custom Fabrication, Research and Development, Motorsport Solutions, Engine Management for OEM and Motorsport ECU, Benchmark N14, N18, B46/48 Mini Cooper JCW
Made in Canada, BC, Langley

04/18/2026

Some OG , should we bring it back?

So much modern tech available on hand, may be its time to revive it in a different way?

activities prepping a beast of a race car on his end, we are happy to be a part of the project. Working in silence, but can only stay silent for so long. I truly miss this kit, but I did not miss the amount of hours that it takes to deliver a package of this kind.

In any case, for special customers we make exceptions to deliver what we do best. There are still customer asking for 500whp packages, will have to put the modern tools and technologies to some use 🤐 You would think the og was already impressive and there is not much to do? Well, lets see what can deliver. home

03/31/2026

The F600 All4 JCW Clubman has delivered an impressive 430 AWHP and 370 FT-LBS of torque. We purposly keep the torque on the conservative side to ensure the gearbox and stock engine internals reliability, particularly since the AWD platform puts significantly more load on the powertrain compared to FWD cars. This F600 setup is tailored for quick spool and delivered a wide power band from 3200 to 6800 RPM. It is fully tuned on the stock fuel system, stock DME, and STG2 TCU, with all supporting hardware specifically tailored for this All4 platform. To achieve these results, we blended e40-50 and 24.5 PSI, timing remains pretty conservative, and have some room left on fuel cap for trims to support weather changes, or another 5% of E. On pump 93, we got 378whp and 350ftlbs tq. There is still a lot of more available from this 48mm F600 trim. F600 fully transformed this wagon. ! Got a real flex :)

03/26/2026

JCW Clubman ALL4. Unlocked, These cars are undiscovered gems of cool. With all the tools and knowledge at our disposal, it’s almost a sin to overlook the all4 platform. After several weeks of long hours, I’m excited to share that we’ve successfully tailored the F600 Kit to fit the all4 platform. It fits and breathes better than OEM!

We’re currently in the tuning phase, and so far, it has been an interesting journey. Ever seen a Mini wagon spinning all4 from the dig? Well, we’ve got that part covered. Let’s see how far we can push this project on stock fueling and the stock engine. If you think you’ve got a cool Clubman, think again! 😎 I’m looking forward to ’s feedback, and we should be able to hit the dyno sometime next week.

Enjoy the craftsmanship behind this project!

03/04/2026

Since I had the opportunity to live with this car for over a week now, before the F600 swap takes place, could not ignore the knowledge put in to this platform over the past two years. We decided to start from scratch and tailor a tune package for these JCW ALL4 and GP3 B48E engines, and more more so for E40. Strong platform, with very respectable potential behind it. This car did 295whp and 340ftlbs wheel on stock tune with local 93 Pump. We tailored a stg1/2 Tune on 93 Octane, got it to 330whp and 375wtq, and then we did a e40 mix, and tailored the tune, easy 350whp and 370ftlbs tq. No hardware modification required, just tune and fuel. On FWD car, can easily expect another 10whp. Amazing platform, we kept the torque in to the conservatieve zone, to keep motor happy. Stock GP3 Turbo, spools too aggressive for my liking, 375ftlbs tq by 2800rpm… on to the F600 next, lets get this ALL4 Hauling some smiles per gallon. Enjoy this development, GP3 Owners, stock car with E40 and you have a machine out of the box :).

02/27/2026

Bronze or Black? Cerakote touch on this work of art Look but don’t touch 😎

02/26/2026

Some love for the JCW Clubby ALL4 Crew, preparing this cool wagon for some F600 activities, got a base line for torque figures in stock, stg2, e40. We got work to do, damn this is a cool car, thank you for cooperation. Lets make this JCW wagon move like no other, stay tune for updates 😎

01/23/2026

in Bronze, stealing the show.

What’s your favourite ?

For those seeking a 300-330whp package, we are pleased to offer an alternative solution: the GP3 Turbocharger. This pack...
01/14/2026

For those seeking a 300-330whp package, we are pleased to offer an alternative solution: the GP3 Turbocharger. This package includes installation support hardware and tuning assistance, ensuring a simple and effective upgrade that maintains true OEM quality.

For more details on this package and our additional offers, please visit rpmpowered.com.

Thank you, and enjoy!

rpmpowered

01/11/2026

F600 in Cerakote Jet Black 😎
Craftsmanship in details

12/31/2025

What’s your 2026 New Years resolution?

Are you ready for this F600 craft 😎

Happy New Years from RPM POWER Team! 🥂🍾

12/24/2025

Happy Holidays from RPM POWER and Team,

Thank you everyone for great support!

Wrapping year end production with Tomy , staying focused on those dimes. No pressure, just making sure you gonna make the next guy welds look bad 😎 🫶

We will be back on track January 2nd.

Merry Christmas and Happy New Years!

Address

Vancouver, BC

Website

Alerts

Be the first to know and let us send you an email when RPM POWER Engine Management Canada/USA posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category