Exquisite Metal Co

Call Website

Exquisite Metal Co EAC is a small father/son business made up of Russ and Casey Schoenfelder.

Our specialties range from custom fabrication to 100 point restorations in all facets of the automotive industry from offroad vehicles to award winning builds. We can accommodate any project big or small.

-Full builds
-Restorations
-Custom Paint
-Wiring
-TIG and MIG Welding
-Chassis and suspension fabrication
-Sheet metal alterations, top chopping, bead rolling, flaring, panel replacement etc
-Fiberglass work
-Headers and exhaust
-Bumper, ladder bars, steps and headache racks for diesels and offroad vehicles
-Drivetrain and suspension updates

10/05/2026

1972 GMC K20 Interior. This started life as a rendering from which was turned into a reality by .ca. Using all the best components from and we worked closely with Derek and his team to give our client their desired result.

Continuation of the interior fabrication in the 1975 Bronco. All panels are made of aluminum then will be covered in foa...
09/21/2026

Continuation of the interior fabrication in the 1975 Bronco. All panels are made of aluminum then will be covered in foam and upholstery. All panels are gapped for material thickness and for optimum fit.
Original rear seat frame was straightened, welds rewelded, blended and new pan made for seat base. Returns added for the panels that will hide the audio components under the seat.

Interior fabrication begins on the 1975 Bronco. Going for a new luxury car feel but paying homage to the vintage bronco ...
09/07/2026

Interior fabrication begins on the 1975 Bronco. Going for a new luxury car feel but paying homage to the vintage bronco styling. All the old pieces are refined and fit much better then factory.
It will have all the modern amenities, heated seats, AC, LED lighting, leather and full Moscani/Focal audio system.
All the audio wires are hidden in channels welded into the floor. This allows the carpet to sit flush without having to raise the floor.

All the little details on the 1974 Bronco that will mostly go unseen. Custom radiator mount/cover, built to spec line cl...
08/25/2026

All the little details on the 1974 Bronco that will mostly go unseen. Custom radiator mount/cover, built to spec line clamps, all components are wired in individually with plugs for serviceability, diff/tcase vents, 4x4 shifters bent to clear, custom stainless lines and the list goes on and on. This will not be your standard bronco build.

Thanks to everyone that stopped by at the Park car show in Comox this weekend. It was nice to catch up with old clients ...
08/10/2026

Thanks to everyone that stopped by at the Park car show in Comox this weekend. It was nice to catch up with old clients and new friends.
We brought out the 1972 GMC K30, 1973 Bronco project, 46 Ford sedan delivery and a 1941 Ford pickup my dad built 38 years ago.

07/29/2026

1990 G30 Van purpose built to haul dirt bikes, full nut and bolt restoration combined with custom touches from top to bottom.

Passenger side header finished on the 1974 Bronco. Space was incredibly tight between the Roadster shop 4WD IFS front su...
07/27/2026

Passenger side header finished on the 1974 Bronco. Space was incredibly tight between the Roadster shop 4WD IFS front suspension and the coyote heads. Ultimate headers cast 90deg bends were used off two of the exhaust ports giving us 1/4in of clearance to the frame at the tightest spot. The headers clear the suspension at full bump and you are still able to access all the bolts to remove them.

1974 Bronco roll bar fabrication. Roll bar was fit with a 3/4in gap to the custom aluminum head liner to allow for foam ...
07/13/2026

1974 Bronco roll bar fabrication. Roll bar was fit with a 3/4in gap to the custom aluminum head liner to allow for foam and Alcantara with no rubbing. The front halo bar will have adjustable links to support the windshield frame. All gussets were curved to keep an organic flow to the cage as the Bronco has a lots of soft rounded shapes not sharp angular transitions.

07/10/2026

1990 G30 van converted to motocross hauler. Complete nut and bolt restoration, along with a bunch of custom fab work and custom interior set up for hauling dirt bikes inside.

Bronco number 4 axles rebuilt and Wilwood 13in brake kits installed. Axles were stripped, sandblasted, painted, rebuilt ...
07/06/2026

Bronco number 4 axles rebuilt and Wilwood 13in brake kits installed. Axles were stripped, sandblasted, painted, rebuilt and then re installed. Rear axle was upgraded to 31 spline and a larger webbed housing out of a 1976 Bronco.
This project is currently available to purchase, reach out if you are interested and we can custom tailor it to you!

Address

Merville, BC

Telephone

+12503378481

Website

Alerts

Be the first to know and let us send you an email when Exquisite Metal Co posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share