Port Flow Engineering

Port Flow Engineering Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Port Flow Engineering, Automotive Service, Kelowna, BC.

This one took a while- 6 point roll bar with removable door bars. All 1-3/4" 0.120" wall Dom tubing. All tube joints tig...
06/11/2026

This one took a while- 6 point roll bar with removable door bars. All 1-3/4" 0.120" wall Dom tubing. All tube joints tig welded. Built to 2026 nhra rule book, good for down to 10 second quarter mile in a car with stock firewall and floor pans. A bit of a challenge fitting everything around stock seats and door panels, but this car is driven on the street-

New billet side cover from CMS installed. All buttoned up and ready to go-
04/17/2026

New billet side cover from CMS installed. All buttoned up and ready to go-

New Wavetrac diff, and speedometer mag drive ring- backlash and carrier bearing preload set.
04/17/2026

New Wavetrac diff, and speedometer mag drive ring- backlash and carrier bearing preload set.

Going back together, all new gears, synchros and bearings, lock-wired roll pins and steel 3-4 shift fork.
04/17/2026

Going back together, all new gears, synchros and bearings, lock-wired roll pins and steel 3-4 shift fork.

This was a big job. G50- 6 speed transaxle from a Porsche 964. Full re - gear to RSR ratios and rebuild will all genuine...
04/17/2026

This was a big job. G50- 6 speed transaxle from a Porsche 964. Full re - gear to RSR ratios and rebuild will all genuine parts, upgrade to a new Wavetrac diff and billet side cover from California Motorsports.

Address

Kelowna, BC

Website

Alerts

Be the first to know and let us send you an email when Port Flow Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Port Flow Engineering:

Shortcuts

Share

Category