blastit.net.au

03/08/2023

04/02/2023

Another happy customer F250 tray blast and paint satin black .. blasted the new dog box and epoxy primed.. for all your on-site blast and paint needs email [email protected]

29/01/2022

Hot sunny day , great for blasting , today we did a blast on a Ford F-250 can , it has been stripped with a grinder and left to rust , we were called in to get it back to nice clean bare metal see out pics

02/10/2021

Few hours Blasting now we have got some nice weather back , today’s job , clean up chassis ready to be painted black , before new deck and custom tool boxes go on , see our dramatic before and after pics , rust ! What rust , blastit clean ,

05/12/2020

Another heritage gem saved this 100 year old house. The old fire place has sadly over the years has over 20 different coats of coloured paint over the life of the house. The owner was wanting to expose the old bricks do we carefully removed the old layers of paint to reveal this beautiful honey colours in the old bricks

12/08/2020

Hi all today’s job removal of a failed water proofing on a large house , the tar based bush in water proofing needed to be completely removed , so the next job can be warranted ,
Big job , but beats a grinder any day , the happy tradesman that has to fix this nightmare said it would of taken him weeks to remove it blaster took a day

01/08/2020

Blast on a Jim’s mowing trailer today

09/04/2020

Hi all today’s job and old engine bay This is the quickest way to prep an area like this saves hours of hand sanding removes paint and the rust Leaving nice clean metal

21/03/2020

Hi second job for today a set of extractors rusty surface. , blasted to clean bare metal ready to paint

21/03/2020

Hi all back to it now the rain has stopped today’s blast a Holden 1 tinned body see our pics body was not perfect once pain was removed it had had quite a few repairs and lots of bog

03/03/2020

Hi all finished a front bumper on a mates car today the lower half of the bar was destroyed and cut off. So another lower was grafted on and moulded fibreglass and primer and paint don’t came up nice see pics the black lower section is the new section to be grafted on , it was trial fitted and once we were happy with alignment was joined with fibreglass mating and resin to both inner and outer surfaces. The shaped with body fill. Then epoxy primed. Rubbed painted with a base 2 k orange to assist in coverage of the orange pearl basecoat colour. It was re rubbed and base coat applied then 2 nice coats of 2 pac clear coat. See all our pics of the stages