Race Ready Wiring

Race Ready Wiring Mobile performance wiring based in Brisbane, QLD.
๐Ÿ”Œ Motorsport wiring
๐Ÿ”Œ Emtron, MoTeC, Haltech, Link

Wrapping up the year at Race Ready Wiring.Thank you to everyone who trusted me with their builds. See you in the new yea...
24/12/2025

Wrapping up the year at Race Ready Wiring.
Thank you to everyone who trusted me with their builds.

See you in the new year!

Closing out the year with a Barra loom for an XC Falcon, powered by a Haltech Nexus R5.The setup runs 12 injectors, OEM ...
16/12/2025

Closing out the year with a Barra loom for an XC Falcon, powered by a Haltech Nexus R5.
The setup runs 12 injectors, OEM coils through a Haltech HPI-6 ignition module, drive-by-wire, and plenty of I/O for a serious build.

RX7 FD in for a CAN keypad install, Haltech IO16 and more. The Elite 1500 was maxed out on outputs, so the Haltech IO16 ...
11/12/2025

RX7 FD in for a CAN keypad install, Haltech IO16 and more. The Elite 1500 was maxed out on outputs, so the Haltech IO16 stepped in to run hazards, dump valve, horn and underglow. The keypad now also controls all ecu related functions.

Rebel LS + PD16 powering this HQ wagon.Old-school body, new-school brains - clean wiring, modern control, and everything...
06/12/2025

Rebel LS + PD16 powering this HQ wagon.
Old-school body, new-school brains - clean wiring, modern control, and everything dialled so the wagon drives like a completely different car.

MoTeC PDM30 loom complete for an R34 GTR.Thermo fan, ECU and ignition power, nitrous solenoid, electric water pump, fuel...
16/10/2025

MoTeC PDM30 loom complete for an R34 GTR.

Thermo fan, ECU and ignition power, nitrous solenoid, electric water pump, fuel pump, and more - all seamlessly controlled and protected through the PDM.

K24 heart, BMW soul.Custom Haltech Elite 1500 Tefzel loom - built, terminated, and labeled for this E30 swap.
13/10/2025

K24 heart, BMW soul.

Custom Haltech Elite 1500 Tefzel loom - built, terminated, and labeled for this E30 swap.

Complete body harness for a Holden HQ wagon running a Haltech PD16 and a Rebel LS. This harness runs the whole show, fro...
26/08/2025

Complete body harness for a Holden HQ wagon running a Haltech PD16 and a Rebel LS. This harness runs the whole show, from fuel pumps and thermo fans to lights and wipers. Completely made of Tefzel wire as per usual!

Super clean EVO IV in for a sensor excess loom, Link G4X plug-in install and a battery relocation. Intake air temp, fuel...
06/08/2025

Super clean EVO IV in for a sensor excess loom, Link G4X plug-in install and a battery relocation.

Intake air temp, fuel pressure, oil pressure and a Link CAN lambda all wired up to the ecu for extra engine safeties. All ready to be finished by MJS GARAGE and tuned by SMW Tuning

New rotary trim dial now available! 12-position selector, built with Raychem DR25, Tefzel wiring, and a sealed DTM conne...
02/08/2025

New rotary trim dial now available!
12-position selector, built with Raychem DR25, Tefzel wiring, and a sealed DTM connector.

Designed for ECU trim inputs like boost, launch, or traction control.
$95 AUD - free shipping Australia-wide.

Link in bio or at racereadywiring.com

Raychem DR25 harness and sub harnessโ€™s all finished up to suit a Mazda RX2 and a Emtron SL8. - Full engine loom- Dual fu...
17/07/2025

Raychem DR25 harness and sub harnessโ€™s all finished up to suit a Mazda RX2 and a Emtron SL8.

- Full engine loom
- Dual fuel pump control
- Water to air IC pump control
- Thermo-fan control
- MoTeC CDI
- MoTeC PLM
- Emtron ED7
- Emtron ETC4

& more!

Methanol + blower Torana drag car in for a Emtron KV8 loom just for data-logging, no engine control. Dual onboard wide b...
23/06/2025

Methanol + blower Torana drag car in for a Emtron KV8 loom just for data-logging, no engine control. Dual onboard wide bands, fuel pressure, oil pressure, gearbox temp, cts, old school ED7 dash etc all wired up and ready for the drags.

Excess sensor loom, battery relocation and dual fuel pump wiring wrapped up for this tidy Evo. Currently getting a full ...
10/06/2025

Excess sensor loom, battery relocation and dual fuel pump wiring wrapped up for this tidy Evo. Currently getting a full head package by mjsgaragebrisbane

Excess sensors include IAT, Ethanol content, fuel pressure, oil pressure and a link Can Lambda kit.

Will be a nice punchy street car when itโ€™s all tuned.

Address

Brisbane
Qld

Alerts

Be the first to know and let us send you an email when Race Ready Wiring posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Race Ready Wiring:

Share