BYE Performance

24/03/2026

Vermeer Diesel Services Bunbury Burnout Challenge 2026

What an unreal day Saturday turned out to be, the heat was on, the tyres were melting, and the competition was next level.

Blown Class Highlights
Huge effort from the BYE crew with 8 of the Top 20 blown cars flying the flag!

● Justin Pitsikas in Refined absolutely nailed it, taking out 🥈 2nd place
●PISTNBROKE (Jason) and BEEH8TD (Beau) pushed hard but found the sand in finals
●Kynan in Gltyplsr getting dialled in with the new build
●ST**FY, Meanie Skid Car ( Adrian) and VYNOT smashing sets and some cobwebs for Brett.
● Gavin in FLACCID is pure entertainment, absolutely torched the pad 🔥

Unfortunately, Hellfeard suffered an axle failure during qualifying.

Open Class Highlights
This was a seriously tough field!
●Big congrats to WARVT (Chris) for taking out 🥉 3rd place
●Massive shoutout to Dre for some epic qualifying skids
●Strong efforts from DPARTYCAR, DYSLEXIC, NUTTED, and ILLICIT making the Top 20 in a stacked lineup

🙏 Big Thanks
A huge thank you to our BYE family for making the weekend what it was, from battling the heat to helping with merch, your support never goes unnoticed.

To watch some of the action head over to the WA Burnouts page.

We’re already gearing up for the next one…
👉 GOOD FRIDAY at the Motorplex, don’t miss it!



Rachel Pitt Photography

24/03/2026

What else could we say 🤷‍♀️🔥🔥🔥🔥

22/03/2026

Gavin doing his thing 🔥 🔥🔥

18/03/2026

Jaden’s VE Senator 📸 733 RWHP
Jaden initially brought his VE Senator to us late last year for a cam upgrade and Harrop 2300 supercharger package. During disassembly, we identified significant wear in the cam bearings, requiring a reassessment of the build.
After discussing multiple options, Jaden elected to proceed with a full engine rebuild, ensuring a strong, reliable foundation to support the added performance of the Harrop setup.
——-
Engine Build
- Crow Cams Australia Pty Ltd Camshaft
- Higgins Race Heads CNC ported cylinder heads
- CP Bullet pistons with Compstar conrods
- ARP Fasteners throughout
- Holley short rocker covers
- Additional BYE supporting components
——
Forced Induction
- Harrop Engineering 2300 supercharger
- LSA drive system with FEAD tensioner
- 1000cc fuel injectors
- Powerbond overdrive kit
- Custom intercooler reservoir
———
Supporting Modifications
- MANTA Performance exhaust system
- Differential rebuild with upgraded gears and Harrop Trutrac
- Complete fuel system upgrade including Teflon lines, pumps, regulator, filter, and in-house controller
- Billet converter and full transmission service
- Tuned on E85
———
The end result delivered exactly what Jaden was after.... exceptional drivability combined with serious performance, producing 733 rear-wheel horsepower on the dyno.

16/03/2026

🔥 This Weekend Bunbury Burnout Challenge 2026 🔥

Catch the BYE Performance team at the Vermeer Diesel Services Bunbury Burnout Challenge 2026 this weekend! Make sure you come and say hello to the crew and grab some BYE merchandise while you're there.

Hitting the pad for BYE:
• Refined - Justin
• ST**FY- Justin
• Gltyplsr - Kynan
• FLACCID - Gavin
• BEEH8TD - Beau
• PISTNBROKE - Jason
• Meanie Skid Car - Adrian
• Hellfeard Panel Van - Ronny
• VNDICTIVE - Scott
• VYNOT - Brett
• WARVT - Dre
• Out On Bail - Ethan
• LiL-JOHNNY - Mitch

Plus numerous other BYE-tuned vehicles joining the action.

With DRAFT on Friday, a massive lineup of cars, and serious prize money on the line, you can expect competitors to be sending it all weekend. It’s shaping up to be one hell of a show.

🚗💨 Come down, support the drivers, and experience the action.

Can’t make it to the event?
You can still grab all our BYE Performance merchandise online:
www.byeperformance.com.au

15/03/2026

13/03/2026

Damian’s S13 – Ready for OUTPACE 🔧🔥

Damian brought his LS Harrop 2300 powered S13 in for tuning. After assessing the vehicle and considering our preferred setup and standards , we upgraded the car with a Link ECU Voodoo Pro ECU, a complete engine harness, and carried out maintenance in a few areas that required attention. We also installed a Link AIM dash to complete the package.

Initial tuning began on the roller dyno, however limited traction prevented full-throttle operation. To achieve accurate results, we moved the car onto the hub dyno, where we were able to the ecu calibration.

The end result: 756 RWHP with an extremely responsive power delivery.

All wrapped up and tuned just in time for OUTPACE tomorrow at MotorMall Wanneroo Raceway. Looking forward to seeing Damien put it to work on track. 💨

13/03/2026

Fitting in this weapon in this week for some late night tuning, after a 🐌 addition.
metal.fab with some killer fab work.

We look forward to seeing the results of this BYE weapon when it hits the track for testing, with some remote tuning required while Justin attends multiple events.

08/03/2026