AMR Concepts

09/08/2026

https://ebay.io/m/IoGMdf

From The BMW N57 6 Cylinder Diesel Engine. This kit simplifies installation is more compact and eliminates the bulky factory cast aluminium rear mount. Universal Rear Support Bracket Kit. To Suit BMW ZF8HP70/75 8 Speed RWD Transmissions.

08/08/2026

New product release late 26 that will give people with a ZF8HP70/90 a better option for an output yoke / fl**ge to be manufactured local to us by a world renown engineering company out of 4340 chromoly steel to utilize a 934 CV the big brother to the 930 CV standard on the dodge 8hp70 / 90 transmission. With the benefits of higher torque capacity and the ability to plunge in and out a lot more from 38mm and up to 55mm on modified CV joints opening up more options to suit live axle vehicles. Will have the option of a reluctor / tone wheel for a drive shaft speed sensor more pics soon of preproduction unit.

04/08/2026

Our VL to VS Commodore 8HP crossmember that works with RB, LS and Holden V8 with our rear mount kit. chromoly tube, 4mm mild steel, stainless doubler washers all tig welded by Jamie at JD Customs and thanks to Robert Quinn for the jig and Kane of Hellbent Fabrications. First lot going out this week. More pics soon.

28/07/2026

Only have 3 N63 8HP70, 1 DODGE VB Challenger 8HP70, 1 Dodge RAM 2WD 8HP70 and a 8HP51 left all with torque convertors.

12/06/2026

We have a selection of RHD 8HP shifters in stock pm what you are after.

11/06/2026

24/05/2026

BMW N63 8HP70 GEN 1 2WD 8 SPEED TRANSISSIONS WITH CONVERTORS FOR SALE $2500
Pick up Langwarrin Victoria.
We can organise delivery Australia wide at extra cost.
0409 251 083

24/05/2026

BMW N63 8HP70 GEN 1 2WD 8 SPEED TRANSISSIONS WITH CONVERTORS FOR SALE $2500
Pick up Langwarrin Victoria.
We can organise delivery Australia wide at extra cost.

24/05/2026

Check out the size difference between a BMW diesel N57 8HP70 2WD transmission and the BMW TWIN TURBO V8 N63 2WD transmission with there 3D SCANS overlayed each other.

26/04/2026

Hi guys our Jaguar kit suits just the 8hp70 from the Petrol/gas V6 V8 engines, we will have a diesel kit very soon. For some reason the diesel 8hp70's have the lower 2 bolts drilled and tapped 20mm lower right were the lower dimples are in the pic of the petrol v6 v8 attached. And my mount bolted to the diesel 8hp70 in the 2nd pic and you can clearly see they tapped the lower section of the mounts on each side. So not much to do to change the drawings of existing kit to fit the diesel 8hp70s but it will be available soon cheers AZ