JOKS Customs

JOKS Customs JOKS Custom mechanics
- services for your 4wds and 2wd cars
- bonnet scoops
-painting of your car

07/11/2022
Another job done and out the doors, this one we had to change the timing gear on the from of the cam as the one that was...
03/09/2022

Another job done and out the doors, this one we had to change the timing gear on the from of the cam as the one that was fitted was incorrect and making his tacho jump around we also had a hand from Wired up auto to remove some wiring from an old chip that was wired into the ecu, these guys were great and helps us get the car running again now time for it to go and get a tune!!!

A few new parts for Connor’s d40, replaced rear shocks, rear pinion seal, shockie rubbers and some seals on his tappet c...
17/07/2022

A few new parts for Connor’s d40, replaced rear shocks, rear pinion seal, shockie rubbers and some seals on his tappet cover, we put the scan tool on his car to have a look at codes and found that one of his wheel speed sensors are not working also and will need to be replaced

Quick 10,000kms service on Reagan’s ford ranger before he goes on a big trip
17/07/2022

Quick 10,000kms service on Reagan’s ford ranger before he goes on a big trip

Few big jobs on the go, just finished off this one! The clutch was burnt out on this one at the gracemere dump so we had...
16/07/2022

Few big jobs on the go, just finished off this one! The clutch was burnt out on this one at the gracemere dump so we had to pull the gearbox out and replace the clutch in the dirt made it a little bit harder of a job but we got it done as usual and she is back up and running!!

Quick little call out to Harrison’s Colorado with an egr fault we had to remove his egr valve and clean it out, this was...
10/07/2022

Quick little call out to Harrison’s Colorado with an egr fault we had to remove his egr valve and clean it out, this was only a short term fix he will need the full intake removed and cleaned out to stop this from happening again

Note to self never do wheel bearings on a skid steer AGAIN!!!! Not a fun job at all
24/03/2022

Note to self never do wheel bearings on a skid steer AGAIN!!!! Not a fun job at all

Little bit of damage repair on the big 80series bonnet after I dropped it
14/03/2022

Little bit of damage repair on the big 80series bonnet after I dropped it

Fitting a New set of swivel hub seals on this hzj79 as they were leaking, pretty easy job just very dirty 😂😂
27/02/2022

Fitting a New set of swivel hub seals on this hzj79 as they were leaking, pretty easy job just very dirty 😂😂

The speedo stopped working on this old 75 series, it ended up just being a broken speedo cable so we replaced that out w...
20/02/2022

The speedo stopped working on this old 75 series, it ended up just being a broken speedo cable so we replaced that out with a new one from and works a dream
-
-
-
-
-

Had to fit this tray to this navara this weekend the tray was off a hilux so we had to make new mounts and fit it up and...
16/10/2021

Had to fit this tray to this navara this weekend the tray was off a hilux so we had to make new mounts and fit it up and wiring in the new taillights also was unsure how this one was going to look but turned out good!!!
-69

-
-
-
-
-

Address

Hamilton Creek, QLD

Website

Alerts

Be the first to know and let us send you an email when JOKS Customs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category