What are the opening hours?

Monday 7am - 3am Tuesday 7am - 3:30am Wednesday 7am - 3:30am Thursday 7am - 3:30pm Friday 7am - 2pm

BMA Marine

Call Website Contact the business

BMA Marine is an engineering company that specialise in ABT Trac stabilisers & thrusters, we also specialise in Wesmar stabilisers and thrusters.

20/08/2026

A recent trip down to Sydney to a client and to complete a Wesmar stabiliser service.

As you can see the fin shaft seals had been leaking sea water for some time causing the thrust bearings to rust.

Stay tuned as this vessel has something exciting coming in 2027

26/05/2026

We were recently up in Airlie Beach completing a Wesmar service on a 72 Hampton, on dismantle we found the previous company who serviced the system did not used genuine Wesmar parts.

The main shaft sleeves were made from the incorrect material & also machined to the incorrect dimensions which resulted in sea water premature failure of the lower seals & excessive wear in the upper components.

As BMA Marine is your Wesmar Australian distributor and service provider you can contact our team for new systems, system servicing or to purchase parts.

📱 07 3090 4999
📩 [email protected]

21/04/2026

Regular completion of scheduled maintenance on your stabiliser system is critical to ensuring safe and reliable operations. As demonstrated in the video, this vessel has missed its scheduled maintenance intervals, resulting in excessive movement across multiple system components.

This condition has led to a knocking sound during fin operations and presents a safety concern, as the stabiliser fins are operating erratically. The excessive movement affects the sensor accuracy, causing incorrect readings from the fin position sensor and further impacting system performance.

As the Australian Distributor and Service provider for ABT Trac & Wesmar you can contact us to discuss any future maintenance on 07 3090 4999 or at [email protected]

09/04/2026

💥 The ABT Trac DC eTrac stabiliser range is here 💥

After rigorous R&D testing and perfecting. ABT Trac has came up with the ultimate DC stabiliser system which will elevate your experience on the water.

If your looking for a full DC eTrac system on a new build, in a refit or would like to convert your current hydraulic stabiliser system to the new DC eTrac fins.

As the Australian Distributors, you can get in touch with our team @ [email protected]

07/04/2026

Last week seen us take a trip to Sydney for ABT Trac diagnostics on 90ft Sunseeker.
With a quick diagnostics, we have the new parts on order to get the vessel back operational.

17/03/2026

33mtr Ferretti ABT Trac Star upgrade project ✨

All the new Trac Link electronic system has been installed along with the new ABT Trac hydraulic components which consist of:
The STAR 400vac electrical motor & VFD, hydraulic tank & oil cooler, high pressure manifold, dual manifolds, hydraulic return blocks, accumulator tank & the cooling pump.

Thank you to Custom Fluid Power for suppling the new main engine PTO pumps, the new bow / stern thruster hydraulic motors spec'd by ABT Trac.
Custom Fluid Power also manufactured & fitted all our new hydraulic hoses through the complete vessel.

Stay tuned for further updates & sea trials to come.

13/03/2026

33mtr Ferretti ABT Trac Star upgrade project ✨

With the actuators all fitted, the cofferdams could be built and fibreglassed into place. Once the fibreglassing was completed we were able to finish installing the hydraulic components, hydraulic hoses & the sound deadening.

The ABT Trac bow and stern thruster legs have had a rebuild and are ready for docking.

The vessel has now returned to the water, once other remaining works has been completed we can complete our sea trials and commissioning.

Contact our team for any ABT Trac inquiries.

12/03/2026

Wesmar stabiliser recently completed on this Selene Classic Explorer 60.

The service consist of replacing all actuator & fin bearings, new seal kits & a full inspection of the remaining system.

Contact our team for all your Wesmar inquires.

11/03/2026

6 year ABT Trac service completed on the Horizon Yacht.

The service consist of all new seals, new cylinder & actuator bearings, re-tensioning main shaft bearings, new hydraulic cylinders, re-sealing locking pin cylinders, new hydraulic oil / filters, new anodes throughout and more.

Contact our team for all your ABT Trac inquiries.

10/03/2026

33mtr Ferretti ABT Trac Star upgrade project

The new 440 Actuators fitted before Christmas.
The new 20x stabiliser fins dummy fitted so the vessels manager and owner could see the comparison to the old system.

Address

1 Boatworks Drive
Coomera, QLD
4209

Opening Hours

Monday	7am - 3am
Tuesday	7am - 3:30am
Wednesday	7am - 3:30am
Thursday	7am - 3:30pm
Friday	7am - 2pm

Telephone

+61730904999

Website

http://www.bmamarine.com.au/

Alerts

Be the first to know and let us send you an email when BMA Marine posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to BMA Marine:

Want your business to be the top-listed autos & automotive service in Coomera?