SAS Air Suspension

SAS Air Suspension SAS Air Suspension for Softails & Custom Motorcycles Softail Air Suspensions used to be a nightmare until now! Absolutely the easiest install.

• The Worlds only Internal Compressor Air Ride Suspension for Softails
• 5 Year Warranty
• Lifetime Warranty on Machined Parts! The SAS Air Suspension has no compressor to mount, no hoses to run, no fittings to fail & is completely plug and play! Raise and lower your rear end at the touch of a button. Add air pressure to improve ride quality, during changing road conditions or while hauling added

weight. Add extra air to compensate for your passenger and then release some for solo riding. You can also release all of the air and park your bike down on the ground. Adjustable air pressure makes for a smooth comfortable ride under any condition. No more bottoming out! The SAS Air Suspension comes with your choice of a Black or Chrome Handle Bar Switch that fits neatly next to your Harley Davidson hand controls (*Fits 1996-Later Harley Davidson Hand Controls). Cylinder Pistons and Rods are doubled sealed & it has pre set dampening. SAS allows the full 4" of Swing Arm travel. All mechanical functions are protected in the durable CNC billet machined body & the remote filtered air breather keeps the compressor clean and dry. The main body is hard anodized and warranted for life. SAS Air Suspension offers a 5 year parts warranty. Fits Softail Harley Davidsons, & Customs.

Three switch options, one clean finish. Whether you’re going for polished stainless, stealth black, or a sleek handlebar...
29/05/2026

Three switch options, one clean finish. Whether you’re going for polished stainless, stealth black, or a sleek handlebar setup, the SAS-00 Kit is built to match the style of your ride.

www.sasairsuspension.com

Before and after our SAS Air Suspension is aired up.From sitting low to ride ready in seconds with the touch of a handle...
08/05/2026

Before and after our SAS Air Suspension is aired up.

From sitting low to ride ready in seconds with the touch of a handlebar switch. SAS Air Suspension gives you the ability to raise your bike for better clearance, comfort, and everyday rideability when you need it most.

www.sasairsuspension.com

2021 Breakout fitted up with our SAS-18.Equipped with  Handlebar Switch.2021 Breakout also fitted up with 👇🏼 7-Piece For...
19/03/2026

2021 Breakout fitted up with our SAS-18.
Equipped with Handlebar Switch.

2021 Breakout also fitted up with 👇🏼
7-Piece Fork Cover Kit
Undermount Indicators
Black Mirror Nuts
V2 Breakout Tail Tidy
Stand Side Wedge Plate
Front Axle Covers
Swing Arm Bolt Cover
Rear Axle Covers
Arlen Ness 15” Front Rotor
Arlen Ness Matching Rear Rotor
Arlen Ness Mini Oval Mirrors

SAS-18 Installed to this 2019 Breakout.Our complete Plug & Play Air Suspension System! with either choice of Chrome Hand...
18/03/2026

SAS-18 Installed to this 2019 Breakout.
Our complete Plug & Play Air Suspension System!

with either choice of Chrome Handlebar Switch or Black Toggle Switch.

More stock available soon📦📥
https://www.sasairsuspension.com/products/

2022 Low Rider S FXLRS Fitted up with 👇🏼 SAS-18 + HBS.Also fitted with: Undermount Front Blinkers  Black Hand Levers  14...
12/03/2026

2022 Low Rider S FXLRS Fitted up with 👇🏼
SAS-18 + HBS.

Also fitted with:
Undermount Front Blinkers
Black Hand Levers
14x2 Highballs
Hydraulic Clutch Conversion
Mini Oval Mirrors
Knurled Fusion Grips
Radical Radius Exhaust

2024 Breakout Fitted with SAS-18 Rear Air Suspension. (More Stock Arriving Soon) Also Fitted up with 👇🏼 7 Piece Fork Cov...
10/03/2026

2024 Breakout Fitted with SAS-18 Rear Air Suspension. (More Stock Arriving Soon)

Also Fitted up with 👇🏼
7 Piece Fork Cover Kit
Undermount Front Blinkers
Internal Front Brake Line
Black Mirror Nuts
Side Stand Wedge Plate
Stealth Softail Rear Foot Pegs
Front Axle Covers
Swing Arm Pivot Bolt Cover
Rear Axle Covers
23 Inch Fender Extension Kit
Blinker Blank Off Plates
Black Slotted Hand Levers
3 Inch Forward Extensions
14x2 High Balls

The one we’ve all been waiting for… SAS-18 Kits are due to arrive in our workshop very soon. We have been working hard o...
26/02/2026

The one we’ve all been waiting for…
SAS-18 Kits are due to arrive in our workshop very soon.
We have been working hard on getting these here as soon as possible for you guys!

We do currently hold stock of the 99 Kits & 00 Kits for those requiring earlier model Air Suspension. Source via our website below 👇🏼
https://www.sasairsuspension.com

2024 Street Bob.Fitted with 👇🏼 SAS-18 Air Suspension. (Currently out of Stock) MORE STOCK COMING SOON…. 🚚Also fitted up ...
26/02/2026

2024 Street Bob.
Fitted with 👇🏼
SAS-18 Air Suspension. (Currently out of Stock)
MORE STOCK COMING SOON…. 🚚

Also fitted up with 👇🏼
Undermount Indicators
B-Phat Fork Covers
V2 Tail Tidy
Rear Axle Covers
Top Shock Bolt Cover
Handlebar Bolt Cover
Stealth Softail Rear Foot Pegs
Hand Levers
Bullet Headlight
2x Acorn Nut
14” Burleigh Bar Highballs
Front Foot Pegs
Fusion Foot Pegs
Handgrips with throttle cable
Shiftpeg
Mini Oval Mirrors
23” Dirty Spoke Front Wheel Wrapped in Metzeler Tyres
18” Rear Wheel
Radical Radius Exhaust System
Fender Extension Bracket
Forward Control Kit
Cruise Control Kit
Wiring Extension Kit
Handlebar Damper Kit

Address

Unit 2, 41B Munibung Road
Cardiff, NSW
2282

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

702-438-2129

Alerts

Be the first to know and let us send you an email when SAS Air Suspension posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share