Punchy Fabrications

Punchy Fabrications Quality automotive modification and fabrication.

Always wanted a mobile crane, lol.Moving those heavy things around the yard just got easier.
24/08/2026

Always wanted a mobile crane, lol.
Moving those heavy things around the yard just got easier.

18/08/2026

Yeeee Haaaaa

15/08/2026

Had a bit of a play today with a great bunch of friends.
I really wish the camera does this more justice, but, if you know, you know.
A few of the others had some issues with a track, so how do you think I attacked that track??? Guess which one i'm talking about.

A super clean 80 Series deserves a super tough set of Rock Sliders to prevent any damage on tracks they were built to dr...
11/08/2026

A super clean 80 Series deserves a super tough set of Rock Sliders to prevent any damage on tracks they were built to drive.
This customer chose a tread style base, and also opted for the harder wearing and grippy textured powder coat option, which is our favourite too.
Theres nothing worse than getting in or out and your foot slips from muddy or wet steps, so we think this is a no brainer.
Can’t wait to see these sliders being tested out on the tracks they were built for.

Some custom brush bars made for this touring Mitsubishi Pajero, ready for its trip to Cape York.Made with our in house m...
02/08/2026

Some custom brush bars made for this touring Mitsubishi Pajero, ready for its trip to Cape York.
Made with our in house machined pipe joiners, to transition from Alloy bullbar, to the steel brush bars, to keep the panels from damage.
Enjoy your trip, we are super jealous here at Punchy Fab.

22/07/2026

Complete Punchy Fabrications fit out, hope you all like it as much as we do.
Follow: 80series_nomads on Instagram for the full build and other adventures.

A couple more jobs we do here if you didn’t know.A customer has a custom turbo’d vehicle and wanted us to skim the cylin...
07/07/2026

A couple more jobs we do here if you didn’t know.
A customer has a custom turbo’d vehicle and wanted us to skim the cylinder head during a freshen up, which we gladly did.
We then also went a step further and 3d scanned the head, after coating it in engineers ink to reduce the reflection for scanning, and designed a custom head gasket for him in Fusion. We will send this off to be laser cut and that will help lower the compression with a thicker head gasket able to be made for his build.

Some nice rock sliders finished to the customer specs last week.Little rear kick out adds to the look, as well as more p...
28/06/2026

Some nice rock sliders finished to the customer specs last week.
Little rear kick out adds to the look, as well as more protection to the rear flare from rocks being flicked up from the front tyres.
Customer went for a flat plate infill panels with dimple die look, and all powder coated in satin black.
Hope to get some finished pics from him once they are installed.
If you need something like this, get in touch with our team so we can get the ball rolling for you.

Set of roof sliders made for an 80 series Landcruiser, to protect the roof gutter edges whilst leaning near trees.... as...
21/06/2026

Set of roof sliders made for an 80 series Landcruiser, to protect the roof gutter edges whilst leaning near trees.... ask me how i know... lol,
This project also allowed me to do some machining, as you can see. To clamp the sliders to the gutters, I made an aluminium version first as it is easier to work with, I then transferred the shape across to some solid bar on the edge, and let the Huron milling machine do it's thing. Once the bottom die was made, did the same for the top die, and now i can press these little clamp fittings in the shop press, so they are all consistent, in 3mm steel plate.
Happy with how they turned out.

First cuts on the new toy all done.The brackets and small parts will be flying out the door now.Big shout out to SWS Wel...
06/05/2026

First cuts on the new toy all done.
The brackets and small parts will be flying out the door now.
Big shout out to SWS Welding for making me a custom cable to get the ArcDroid to talk to the SWS Speedcut 50 Plasma cutter in such quick time.

Address

Burpengary, QLD

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 10am - 2pm

Website

Alerts

Be the first to know and let us send you an email when Punchy Fabrications posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category